how to turn off DPD detection that USG2000 series equipment

125

In the command line system view, configure the undo Ike DPD command, turn off the DPD detection.

Other related questions:
Method used to disable the DPD function on the USG2000
In the system view, run the undo ike dpd command to disable the DPD function.

How to turn off LED indicators of an AT
After an AT is powered on, run the led off command in the system view to turn off the AT indicators to save energy and minimize illumination impacts on environment.

How to turn off LED indicators of an AP
After a Fit AP is powered on, log in to the AC and run the led off command in the AP system profile view to turn off all indicators on the Fit AP to save energy and minimize illumination impacts on environment. Indicators on a Fat AP cannot be turned off.

How can I turn off the DP300 display?
Tap the power button in the lower right corner of the display and choose to turn off the display, exit the videoconferencing system, or restart the videoconferencing system as prompted.

How to turn on and turn off the right of call transfer for the user registered with U19
Use the following command: Add right: config modify subscriber dn [subpbxno <0-251>] operatenewservice add newservicerights hookingtransfer Delete right: config modify subscriber dn [subpbxno <0-251>] operatenewservice del newservicerights hookingtransfer NOTE: dn is user number; subpbx can be queried by using command: show subscriber dn

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top