Whether bandwidth management can be performed for public IP addresses after source NAT on the USG6000 series

0

The firewall supports bandwidth management for public IP addresses after source NAT or before the NAT server.

Other related questions:
Whether an address in the NAT address pool can be configured as a public IP address for NAT Server
Yes.

Whether the NAT policy of the USG2000 can replace the source IP address and destination IP address simultaneously
The bidirectional NAT function of the USG2000 can bidirectionally translate the destination IP address and source IP address simultaneously.

Whether the public IP address and private IP address can be the same in server mapping mode on the USG6000 series
The public IP address and private IP address configured for NAT Server on the USG6000 series cannot be the same.

Whether the NAT address group configured for the USG6000 affects the access to the public network
After the NAT address group is configured, it does not affect the access to the public network when it is not called.

Query of the attack source IP address on the USG6000 series
Run the display anti-ddos source-ip [ ipv4 ip-address [ vpn-instance vpn-instance-name ] | ipv6 ipv6-address ] command on the USG6000 to view the DDoS traffic source IP address monitoring table.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top