USG6000 configure SNMP

87

The USG6000 configure the device to communicate with the network management server as follow:
Configuration steps:
1. Configure the basic data of the interface, including: IP address, interface to join the security zone and route.
2. Configure the basic SNMP functions, including enabling the SNMP agent, configuring the SNMP version, and configuring the community name.
3. Configure user access, configure NMS1 cannot manage NGFW, and restrict NMS2 to manage only system nodes on NGFW.
4. Configure the trap function of NGFW so that the alarms generated by NGFW can be sent to the NMS.
5. Configure the contact method for the administrator.
6. Configure the network management.

Other related questions:
SNMP configuration on S series switch
S series switches (except S1700 switches) support three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. SNMPv1 and SNMPv2c use community names for authentication, resulting in low security, whereas SNMPv3 uses authentication and encryption technologies to enhance security. The following uses SNMPv2c configuration as an example: [HUAWEI] snmp-agent //Enable SNMP. [HUAWEI] snmp-agent sys-info version v2c //Set the SNMP version to SNMPv2c. [HUAWEI] snmp-agent community write adminnms01 //Set the SNMP write community name. For common SNMP configuration information, see "Common SNMP Operations" in S1720&S2700&S3700&S5700&S6700&S7700&S9700 Series Switches Common Operation Guide. For typical SNMP configuration examples, see "Typical SNMP Configuration" in "Typical Network Management and Monitoring Configuration" of S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration Examples. Common configuration and typical configuration examples for S9300 and S12700 series switches are the same as those for Sx700 series switches. The Sx700 series switches are used as an example here.

Configuring server SNMP
For details, see "SNMP Configuration" in Link.

What are SNMP commands and what are their functions for S series switches
S series switches (except S1700) use different commands to implement different SNMP functions. For example: snmp-agent //Enable SNMP. snmp-agent sys-info version //Configure the SNMP version. snmp-agent community //Configure an SNMP read-write community name. snmp-agent target-host trap //Configure the destination address to receive traps. snmp-agent community complexity-check disable //Disable community name complexity check. For details on SNMP commands, click S2750&S5700&S6700 V200R003(C00&C02&C10) Command Reference and choose Network Management and Monitoring Commands > SNMP Configuration Commands. Choose corresponding materials based on the device model and version. S series fixed switches are used here as an example.

SNMP configuration method on an AR router
An AR router supports communication with the NMS over SNMP. SNMP falls into three versions: V1, V2C, and V3. Both V1 and V2C implement access control based on a community name and the MIB view, which poses a security risk. V3 implements access control based on users, user groups, and the MIB view. Security is improved. Therefore, you are advised to use V3. For details, choose Configuration > CLI-based Configuration �?> CLI-based Configuration > SNMP Configuration through the URL: Product Documentation.

Configuring SNMP for an E9000
For details about how to configure SNMP for an E9000, see SNMP.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top