OID used by the NMS to collect serial port traffic


The OID for the NMS to collect serial port traffic is

Other related questions:
Traffic statistics collection on S series switch
On S series switches (except S1700 switches), the statistic enable command in the traffic behavior view can be used to enable traffic statistics collection in the traffic behavior. To view the statistics about packets matching a traffic policy, enable the traffic statistics collection function. After the traffic statistics collection function is enabled, you can run the display traffic policy statistics command to view packet statistics. For the example for configuring traffic statistics, see "Example for Configuring Traffic Statistics" in Typical QoS Configuration.

Statistics collection intervals supported by the NMS for S series switches
For S series switches (except the S1700), you can set the statistics collection interval on the NMS to 5 min, 15 min, 30 min, 60 min, or 1 day.

How can I obtain the IP address and log in to the endpoint web interface when I cannot obtain any endpoint information?
Obtain the IP address and log in to the endpoint web interface when no endpoint information can be obtained as follows: Use a serial port to connect to endpoint com1, restart the endpoint, and run the following command to search for mottsec1: mottsec1 inet add netmask

IAD serial port login method
You can use HyperTerminal or securityURT tool or putty tool, codec rate is 9600, and the parity check data is no login account and password, the password is root/huawei123, the old version may also be admin.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top