Monitoring statistics of the NMS accessing MIB nodes

19

The procedure for monitoring statistics of the NMS accessing MIB nodes is as follows:
Run display snmp-agent statistics mib [ address ipv4-address | ipv6 ipv6-address | vpn-instance vpn-instance-name address ipv4-address ] in any view to view statistics of the NMS accessing MIB nodes of the device.
If the MIB node access measurement function needs to be disabled due to its excessively high CPU usage or other reasons, run snmp-agent statistics mib disable in the system view.

Other related questions:
Clearing statistics of the NMS accessing MIB nodes
The procedure for clearing statistics of the NMS accessing MIB nodes is as follows: In the user view, run reset snmp-agent statistics mib [ address ipv4-address | ipv6 ipv6-address | vpn-instance vpn-instance-name address ipv4-address ] to clear statistics of the NMS accessing MIB nodes of the device.

MIB node of CPU usage
The HUAWEI-CPU-MIB file is used to query CPU usage information of the SRU and interface card. The hwCpuDevTable is used to describe CPU usage. The OID prefix of the table is 1.3.6.1.4.1.2011.6.3.4.1. The indexes of the table are hwFrameIndex, hwSlotIndex, and hwCpuDevIndex. hwCpuDevIndex [1] Integer32 This node is used for expansion. On a single-CPU router, this value is 0. not-accessible For the SRU, the value 0 indicates the information of the primary core, and a value from 1 to 255 indicates the information of a secondary core. Example: 5 indicates that the CPU usage of the primary core of the SRU is 27% and the CPU usage of the secondary core 1 is 1%. ***** SNMP QUERY STARTED ***** 1: hwCpuDevDuty.0.0.0 (integer) 27 2: hwCpuDevDuty.0.0.1 (integer) 1 3: hwAvgDuty1min.0.0.0 (integer) 27 4: hwAvgDuty1min.0.0.1 (integer) 1 5: hwAvgDuty5min.0.0.0 (integer) 27 6: hwAvgDuty5min.0.0.1 (integer) 1 ***** SNMP QUERY FINISHED *****

Does the AR series support the web NMS
The AR series supports the web network management system (NMS) from V200R002C01. You can use the web network management system to manage and maintain AR series.

UPM monitoring for OSN 8800 on the NMS
UPM monitoring for OSN 8800 cannot be performed using the NMS.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top