Method used to resolve the full log space issue on the USG6000

1

The method used to resolve the full log space issue on the USG6000 is as follows:

1. Choose System > Log Configuration.

2. Select the method used to process the logs when the disk space is full in Processing Mode.

a. Overwrite: When the log storage space of the hard disk is insufficient, the hard disk receives new logs and discards the earliest logs.
b. Discard: When the log storage space of the hard disk is insufficient, the device directly discards new logs and does not receive any logs.
By default, when the log storage space of the hard disk is insufficient, the hard disk adopts the overwrite processing mode.

Other related questions:
No log generated when the space for traffic logs is full
The hard disk of the device has fixed storage space for each type of logs and reports. You can set thresholds in the Alarm Threshold area in the Configure Disk Alarm Threshold dialog box. When the storage space of one type of logs and reports is full, the device processes new logs and reports. By default, the hard disk continues receiving new logs and discards the oldest logs. If the log processing mode is manually changed to discard, you can select Overwrite if you want to receive new logs when the configured disk space is full. Alternatively, run the disk log-full overwrite command.

Failed to log in to the U1960 web management system
The solution is as follows: 1. Ensure that the HTTP function of the U1960 is enabled. If not, run the config http switch on command to enable it. 2. Upload the following four files to the U1960 using TFTP: webfile, webrootcrt, websrvcrt, and websrvkey.

Method used to export policy matching logs on the USG6000
The method used to export policy matching logs on the USG6000 is as follows: 1. Choose Monitor > Logs > Policy Matching Logs. 2. Select Column Customization and select or cancel various types of conditions displayed in policy matching logs. 3. Click Export to export policy matching logs in the CSV format to the administrator's PC.

Method used to input logs of the USG2000, USG5000, and USG6000 to the log server
The method used to input logs of the USG2000, USG5000, and USG6000 to the log server is as follows: 1. Run the system-view command to enter the system view. 2. (Optional) Run the info-center source { module-name | default } channel { channel-number | channel-name } [ log { state { on | off } | level severity }* ] command to add logs to the information channel. By default, the system outputs logs to the log server using information channel 2. The log switch is set to on and the severity is set to informational. You only need to configure this command when you modify the default system configuration. 3. Configure the module-name to set the module that outputs logs. 4. Configure the severity to set the severity of output logs. 5. Bind the information channel with the log server, so that logs can be output to the log server over this channel. 6. Configure the IP address and parameters of the log server. info-center loghost ip-address [ port ] [ module { module-name } &<1-6> ] info-center loghost ip-address [ port ] [ channel { channel-number | channel-name } | facility local-number | language { chinese | english } ]* The channel-number or channel-name must be consistent with that configured in 1. 7. (Optional) Run the info-center loghost source ip-address command to specify the IP address that sends logs.

Methods used to export logs of the USG2000, USG5000, and USG6000
Methods used to export logs of the USG2000, USG5000, and USG6000: 1. The method used to export logs of the USG6000 is as follows: Choose Monitor > Logs > Traffic Logs/Threat Logs/URL Logs/Content Logs/Operation Logs/System Logs/User Activity Logs/Policy Matching Logs/Mail Filtering Logs/Audit Logs. Click Export to export system logs in the CSV format to the administrator's PC. 2. The method used to export logs of the USG2000 or USG6000 is as follows: a. Choose Logs > Log Display > Log Display. b. Select the Log Display tab. c. Open or save a log file in the following ways: 1) Click Export. In the displayed File Download dialog box, click Open to view the configuration of the log buffer and log content. 2) Click Save to save the file driver or folder. Click Save. If the operation is successful, you can view the saved logs in the log export path.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top