Method used to view the license center domain name on firewalls

14

You can view the license center domain name as follows:
Run the display license-server domain command.

Other related questions:
Method used to view the license state on firewalls
Run the display license command to check the license state.

Method used to view the license information on USG firewalls
On the USG2000, USG5000, and USG6000, you can run the display license command to view the license information. display license Device ESN is: 210235XXXXXXXXXXX The file activated is : hda1:/license.dat //Activated license file The time when activated is : 2010/08/31 11:23:45 //System time when the license file is activated. You can determine whether the license file is activated. VFW: 100 SSL VPN Concurrent User : 500 Content Filtering: Enabled GTP: Enabled IPS: Enabled; service expire time: 2012/06/16 Anti Virus : Enabled; service expire time: 2012/06/16 Anti Spam: Enabled; service expire time: 2012/06/16 Pre-defined URL category query: Enabled; service expire time: 2012/06/16 //License expiration time

Method used to debug the license on firewalls
The license debugging on firewalls is as follows: Before enabling the debugging function, you must run the terminal monitor and terminal debugging commands in the user view to enable the information display and debugging information display functions of the terminal. Note: Enabling the debugging function affects the system performance. After debugging, run the undo debugging all command to disable the debugging function immediately. You can run the debugging license command to debug the device license.

Method used to activate the license on firewalls
You can activate the license as follows: In CLI mode: In the system view, run the license file command to activate the license file. system-view, [sysname] license file license.dat In web UI mode: Log in to the web UI, and choose System > License Management. Activate the license file. -Manual activation on local 1. Select Manual Activation on Local in License Activation Mode. 2. Click Browse, and select the license file to be uploaded. 3. Click Activate. -Online automatic activation a. Select Online Automatic Activation in License Activation Mode. 4. Enter License Center Domain Name and License Authorization Code in sequence. 5. Click Activate. Check whether the license is successfully activated. -In CLI mode: In any view, run the display license command to check the license information. display license -In web UI mode: Log in to the web UI home page or check the license information on the License Management page.

Blocking a specified domain name on the firewall
For V100R001 and V5, you can configure a security policy, set the destination address to a domain name group that contains the list of domain names to be blocked, and set the action to block to block these domain names. You can also configure URL filtering to blacklist the domain names to be blocked so as to block them. For V300R001, you can only configure URL filtering to blacklist the domain names to be blocked so as to block them.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top