Start time for the activation of license control items

19

The start time for the activation of license control items is calculated as follows:
After the authorized ID and ESN are bound with the ESDP platform, a license file is generated. At this time, the ESDP system time is the activation time for all license control items. The validity period is calculated based on the activation time.

After the license file is generated on the ESDP platform, immediately load it on a device and activate it to avoid resource waste.

Other related questions:
When should I start to calculate the activation time of license control items
When the ESDP binds authorization IDs and device ESNs and generates a license file, the system time of the ESDP is the activation time of all license control items. The validity periods of the license control items start from the activation time. After the license file is generated, download and load it on the device to prevent resource wastes.

License control items for the USG9000
License control items for the USG9000 are as follows: -Number of virtual systems -Number of IPSec tunnels -GTP function -DS-Lite function -NAT64 function -IPv6 Rapid Deployment function -Upgrade service of the intrusion prevention feature database

Functions of license control items on firewalls
Functions of license control items on firewalls are as follows: -Function: A license control item controls whether a function of a product is available. The function can be used only after the license file is successfully loaded. -Resource: A license control item controls the maximum number of resources used by a certain function of a product. Without the license, the function can be used with only limited resources. -Upgrade service: A license control item controls the upgrade service of a certain product function. The upgrade service is provided for the function only after the license file is successfully loaded.

Which control item of the U1980 license specifies permitted conference specifications?
The U1910 and U1930 do not provide license control items (by default, both U1910 and U1930 support a maximum of four conferences and 12 participants. Each conference hall supports a maximum of 12 participants). For the other U1900 models, you can query the maximum number of concurrent participants in a conference configured on the gateway. To achieve so, run the show license command and view the value of Conference users in the command output. For devices that support the management through the web UI, users can log in to the web management page of the device and choose System > View License to obtain the value of Conference users.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top