Method used to view the current configuration of the USG2000 and USG5000

4

You can run the display current-configuration command to view all configuration commands of the USG firewalls.

Other related questions:
Method used to view the current memory usage on the USG2000, USG5000, and USG6000
You can view the memory usage of the USG2000, USG5000, or USG6000 as follows: Run the display health command to view the system resource usage: display health Slot CPU Usage Memory Usage (Total) ----------------------------------------------------- 0 MPU(Master) 4% 35% 4096MB CPU indicates the CPU usage and memory indicates the memory usage.

Method used to view logs of the USG2000 or USG5000
Method used to collect logs using the command lines on the USG2000, USG5000, or USG6000 1. In CLI mode: [USGXXXX]display logbuffer //Collect logs. 2. Collect logs on the web UI: a. Collect logs on the USG2000 or USG5000 as follows: Choose Logs > Log Display, and select the corresponding log type in the right option box. b. Collect logs on the USG6000 as follows: Choose Monitor > Logs > System Logs to view system logs. Note: You cannot query the discarded or overwritten historical logs.

Method used to compare differences between the current configuration and the saved configuration on the USG2000 and USG5000
Run the compare configuration [ current-line-number save-line-number ] command to compare whether the current configuration is consistent with the configuration saved on the device. If no parameter is input, the system compares the information in the profile from the first line. The current-line-number and save-line-number parameters are used to further compare the differences identified in the profiles. When a difference is identified, the system compares the current profile and the saved profile from the line where the difference starts. A certain number of characters (by default, 150 characters) are displayed. If the number of characters is less than 150, all characters are displayed.

Method used to view the enabled profile of the USG2000 and USG5000 firewalls
Run the display startup command to view the profiles used for the current boot and the next boot. display startup MainBoard: Configed startup system software: flash:/sup.bin Startup system software: flash:/sup.bin Next startup system software: flash:/sup.bin Startup saved-configuration file: flash:/vrpcfg.zip Next startup saved-configuration file: flash:/vrpcfg.zip Next startup configuration: backup-configuration Startup saved-configuration file/Profile used for the current boot Next startup saved-configuration file/Profile used for the next boot

Method used to view the current configuration of the USG6000
You can run the display current-configuration command to view all configuration commands of the USG firewalls.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top