Method used to back up data on the USG6000

64

The methods used for backing up configuration content and restoring the configuration are as follows:
1. Back up and restore profiles using the FTP, SFTP, and TFTP servers (recommended). This method is applicable to the situation in which a large number of devices are maintained in a centralized manner.
2. If the device serves as an FTP server, you can configure the FTP server function for configuration backup and restoration without configuring FTP software. Open FTP ports cause certain potential security risks.
3. Back up the profiles on the storage server. The operation is simple and does not require other software. If the data is backed up on the same storage media, the primary and backup profiles may be damaged simultaneously.
4. The configuration data backup and restoration on the web UI is simple. You need to configure the web login in advance.

Other related questions:
Method used to back up data on the USG2000 and USG5000
The methods used for backing up configuration content and restoring the configuration are as follows: 1. Back up and restore profiles using the FTP, SFTP, and TFTP servers (recommended). This method is applicable to the situation in which a large number of devices are maintained in a centralized manner. 2. If the device serves as an FTP server, you can configure the FTP server function for configuration backup and restoration without configuring FTP software. Open FTP ports cause certain potential security risks. 3. Back up the profiles on the storage server. The operation is simple and does not require other software. If the data is backed up on the same storage media, the primary and backup profiles may be damaged simultaneously. 4. The configuration data backup and restoration on the web UI is simple. You need to configure the web login in advance.

Method used to back up MQ data in a FusionInsight Farmer environment
MQ information is persistently stored on an SSD. When an exception occurs, SSD data can be automatically collected if the SSD is unformatted. The cluster does not provide independent MQ data backup and restoration functions.

Failed to Back Up System Configuration Data
1.Use PuTTY to log in to the OceanStor BCManager node. Use the Management IP address to log in as user ICUser. 2.Run the following command to disable logout on timeout. TMOUT=0 NOTE: After you run this command, the system continues to run when no operation is performed, resulting a risk. For security, run exit to exit the system. 3.Run the following command and enter the password of user root to switch to user root: su - root 4.Run the following command to go to the directory of the configuration file. cd /etc/ssh 5.Run the following command to open the configuration file. vi sshd_config 6.Press I to enter the editing mode. 7.Change parameter values in the configuration file, as shown in the following: PermitRootLogin yes PasswordAuthentication yes PermitEmptyPasswords no ChallengeResponseAuthentication no UsePAM yes 8.Press ESC and enter :wq to save the settings and exit the VI editor. 9.Run the following command to restart the sshd service. service sshd restart 10.After the next backup point in time, check whether the backup failure alarm has been cleared. If yes, no further action is required. If no, contact technical support.

Does the MQ data need to be backed up?
MQ information is persistently stored on an SSD. When an exception occurs, SSD data can be automatically collected if the SSD is unformatted. The cluster does not provide independent MQ data backup and restoration functions.

How to back up and restore U1930 data
1. Log in to the device using the LMT and access the config mode. 2. Choose Version > Configuration File Management, select the files to back up, set Execution Mode to Back Up, specify the backup directory, select the corresponding device, and click Execute. 3. Check the backup files. 4. After the backup is complete, click Open Directory, open the backup directory, and check whether the folder named after the device IP address contains a configuration file with the file name in format of _YYYYMMDDhhmmss (for example, license_20131106114255.dat). 5. Archive the configuration file for future system recovery. 6. Use the TFTP tool to upload the configuration file to the device when you need to restore the data.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top