Method used to view the content of the profile used for the next boot on the USG2000 and USG5000

11

Run the display saved-configuration command to view the content of the profile used for the next boot.

Other related questions:
Method used to view the content of the profile used for the next boot on the USG6000
Run the display saved-configuration command to view the content of the profile used for the next boot.

Method used to view the enabled profile of the USG2000 and USG5000 firewalls
Run the display startup command to view the profiles used for the current boot and the next boot. display startup MainBoard: Configed startup system software: flash:/sup.bin Startup system software: flash:/sup.bin Next startup system software: flash:/sup.bin Startup saved-configuration file: flash:/vrpcfg.zip Next startup saved-configuration file: flash:/vrpcfg.zip Next startup configuration: backup-configuration Startup saved-configuration file/Profile used for the current boot Next startup saved-configuration file/Profile used for the next boot

Method used to view logs of the USG2000 or USG5000
Method used to collect logs using the command lines on the USG2000, USG5000, or USG6000 1. In CLI mode: [USGXXXX]display logbuffer //Collect logs. 2. Collect logs on the web UI: a. Collect logs on the USG2000 or USG5000 as follows: Choose Logs > Log Display, and select the corresponding log type in the right option box. b. Collect logs on the USG6000 as follows: Choose Monitor > Logs > System Logs to view system logs. Note: You cannot query the discarded or overwritten historical logs.

Method used to view the current configuration of the USG2000 and USG5000
You can run the display current-configuration command to view all configuration commands of the USG firewalls.

Method used to view an online L2TP user on the USG2000 and USG5000
The method used to view an online L2TP user on the USG2000 and USG5000 is as follows: You can run the display access-user command to view an online user. HRP_M[Slave-aaa] display access-user Total users : 1 Wait authen-ack : 0 Authentication success : 1 Accounting ready : 1 Accounting state : 0 Wait leaving-flow-query : 0 Wait accounting-start : 0 Wait accounting-stop : 0 Wait authorization-client : 0 Wait authorization-server : 0 Domain-name Online-user default : 1 The used CID table are : 0 To view specific user information, run the display access-user [ domain domain-name | ip-address ip-address | mac-address mac-address | user-id user-id | user-name user-name] command: HRP_M[Slave-aaa] display access-user user-id 0 User access index : 0 State : Used User name : jtq User access VLAN/PVC : 0 User MAC : ffff-ffff-ffff User IP address : 1.1.1.2 User access type : PPP User authentication type : PPP authentication Current authen method : Local authentication Authen result : Success Current author method : Local authorization Author result : Success Action flag : Idle Authen state : Authed Author state : Idle Accounting method : No accounting Accounting start time : 2008-03-15 06:09:39 Accounting state : Ready ACL-number : 255 Priority : - Up CAR enable : NO Up average rate : 0(bps) Up peak rate : 0(bps) Down CAR enable : NO Down average rate : 0(bps) Down peak rate : 0(bps) Up packets number(high,low) : (0,771) Up bytes number(high,low) : (0,42360) Down packets number(high,low) : (0,761) Down bytes number(high,low) : (0,42616)

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top