Method used to view the enabled profile of the USG2000 and USG5000 firewalls

18

Run the display startup command to view the profiles used for the current boot and the next boot.

display startup
MainBoard:
Configed startup system software: flash:/sup.bin
Startup system software: flash:/sup.bin
Next startup system software: flash:/sup.bin
Startup saved-configuration file: flash:/vrpcfg.zip
Next startup saved-configuration file: flash:/vrpcfg.zip
Next startup configuration: backup-configuration

Startup saved-configuration file/Profile used for the current boot
Next startup saved-configuration file/Profile used for the next boot

Other related questions:
Method used to view the content of the profile used for the next boot on the USG2000 and USG5000
Run the display saved-configuration command to view the content of the profile used for the next boot.

Method used to view logs of the USG2000 or USG5000
Method used to collect logs using the command lines on the USG2000, USG5000, or USG6000 1. In CLI mode: [USGXXXX]display logbuffer //Collect logs. 2. Collect logs on the web UI: a. Collect logs on the USG2000 or USG5000 as follows: Choose Logs > Log Display, and select the corresponding log type in the right option box. b. Collect logs on the USG6000 as follows: Choose Monitor > Logs > System Logs to view system logs. Note: You cannot query the discarded or overwritten historical logs.

Method used to view the current configuration of the USG2000 and USG5000
You can run the display current-configuration command to view all configuration commands of the USG firewalls.

Exporting profiles from the USG2000 and USG5000
You can back up configuration on the USG2000 and USG5000 as follows: 1. Web UI: The current configuration can be backed up to the terminal. The profiles are in .zip or .cfg format and do not support Chinese characters. a. Choose System > Maintenance > Configuration Management. b. Click Export to export the current configuration. c. Click Save and select a path to save the profile. 2. CLI Configuration procedure: Configure the basic functions of the FTP server as follows: a. Enable the FTP server functions and configure valid login users. b. Log in to the device by entering the FTP command after the command prompt. c. Log in to the FTP server in FTP mode using the correct user name and password. d. Download files to the PC. Procedure: a. Enable FTP on the FTP server and configure FTP user authentication information. system-view, [USG] ftp server enable [USG] aaa [USG-aaa] local-user admin password irreversible-cipher Admin@123 b. On the FTP server, configure the FTP user authorization mode, priority, and authorization directory. [USG-aaa] local-user admin service-type ftp [USG-aaa] local-user admin level 3 [USG-aaa] local-user admin ftp-directory flash: [USG-aaa] quit c. Configure the IP address of the FTP server. [USG] interface GigabitEthernet 0/0/1 [USG-GigabitEthernet0/0/1] ip address 128.18.90.111 255.255.255.0 [USG-GigabitEthernet0/0/1] quit Verification: On the PC, log in to the FTP server, obtain files in the FTP directory, and save the files in the user directory of disk C. C:\Documents and Settings\user> ftp 128.18.90.111 User(128.18.90.111:(none)):admin Password: 230 User logged in. ftp> binary ftp> get sys.bin ftp> quit On the local PC, view the obtained files. C:\Documents and Settings\user>dir 2010-09-25 15:56 20,116,676 sys.bin

Method used to enable the information center on the USG2000, USG5000, and USG6000
The method used to enable the information center on the USG2000, USG5000, and USG6000 is as follows: system-view, Enter system view, return user view with Ctrl+Z. [USG]info-center enable //This command is used to enable the information center.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top