Importing the USG2000 and USG5000 profiles to files in other models

7

Importing the USG2000 and USG5000 profiles to files in other models

The devices that mutually copy profiles must be in the same model and use software in the same version.
The profiles are in .zip or .cfg format and do not support Chinese characters.
1. Choose System > Maintenance > Configuration Management.
2. Click Select. The Profile Management page is displayed.
3. Click Upload. The Upload Files page is displayed.
4. Click Browse, and select the profile to be uploaded.
5. Click Upload to upload the profile.
After the profile is successfully uploaded, the Profile Management page is displayed. The corresponding files are displayed on the list.
6. Set the system to use the corresponding profile upon the next boot.
After the system is restarted, the profile can be upgraded.

Other related questions:
Importing the USG6000 profiles to files in other models
You can upgrade the USG6000 profile as follows: The devices that mutually copy profiles must be in the same model and use software in the same version. The profiles are in .zip or .cfg format and do not support Chinese characters. 1. Choose System > Profile Management. 2. Click Select. The Profile Management page is displayed. 3. Click Upload. The Upload Files page is displayed. 4. Click Browse, and select the profile to be uploaded. 5. Click Upload to upload the profile. After the profile is successfully uploaded, the Profile Management page is displayed. The corresponding files are displayed on the list. 6. Set the system to use the corresponding profile upon the next boot. After the system is restarted, the profile can be upgraded.

Importing profiles on the web UI of the USG2000 and USG5000
Importing profiles to the USG2000 and USG5000 The profiles are in .zip or .cfg format and do not support Chinese characters. 1. Choose System > Maintenance > Configuration Management. 2. Click Select. The Profile Management page is displayed. 3. Click Upload. The Upload Files page is displayed. 4. Click Browse, and select the profile to be uploaded. 5. Click Upload to upload the profile. After the profile is successfully uploaded, the Profile Management page is displayed. The corresponding files are displayed on the list.

Exporting profiles from the USG2000 and USG5000
You can back up configuration on the USG2000 and USG5000 as follows: 1. Web UI: The current configuration can be backed up to the terminal. The profiles are in .zip or .cfg format and do not support Chinese characters. a. Choose System > Maintenance > Configuration Management. b. Click Export to export the current configuration. c. Click Save and select a path to save the profile. 2. CLI Configuration procedure: Configure the basic functions of the FTP server as follows: a. Enable the FTP server functions and configure valid login users. b. Log in to the device by entering the FTP command after the command prompt. c. Log in to the FTP server in FTP mode using the correct user name and password. d. Download files to the PC. Procedure: a. Enable FTP on the FTP server and configure FTP user authentication information. system-view, [USG] ftp server enable [USG] aaa [USG-aaa] local-user admin password irreversible-cipher Admin@123 b. On the FTP server, configure the FTP user authorization mode, priority, and authorization directory. [USG-aaa] local-user admin service-type ftp [USG-aaa] local-user admin level 3 [USG-aaa] local-user admin ftp-directory flash: [USG-aaa] quit c. Configure the IP address of the FTP server. [USG] interface GigabitEthernet 0/0/1 [USG-GigabitEthernet0/0/1] ip address 128.18.90.111 255.255.255.0 [USG-GigabitEthernet0/0/1] quit Verification: On the PC, log in to the FTP server, obtain files in the FTP directory, and save the files in the user directory of disk C. C:\Documents and Settings\user> ftp 128.18.90.111 User(128.18.90.111:(none)):admin Password: 230 User logged in. ftp> binary ftp> get sys.bin ftp> quit On the local PC, view the obtained files. C:\Documents and Settings\user>dir 2010-09-25 15:56 20,116,676 sys.bin

Method used to view the enabled profile of the USG2000 and USG5000 firewalls
Run the display startup command to view the profiles used for the current boot and the next boot. display startup MainBoard: Configed startup system software: flash:/sup.bin Startup system software: flash:/sup.bin Next startup system software: flash:/sup.bin Startup saved-configuration file: flash:/vrpcfg.zip Next startup saved-configuration file: flash:/vrpcfg.zip Next startup configuration: backup-configuration Startup saved-configuration file/Profile used for the current boot Next startup saved-configuration file/Profile used for the next boot

Method used to view the content of the profile used for the next boot on the USG2000 and USG5000
Run the display saved-configuration command to view the content of the profile used for the next boot.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top