Setting the console password on the USG6000

2

For the login through the console port, the account and password must be set.
1. During the first log, use the default account (admin) and password (Admin@123) of the console port.
2. To prevent an unauthorized user to access the device with the default account and password, you are advised to change this password after your first login to the device.
system-view
[sysname] user-interface Console 0
[sysname-ui-Console0] authentication-mode local user maintain password cipher Password@123

Other related questions:
Setting the console password on the USG2000&5000
For the login through the console port, the account and password must be set. 1. During the first log, use the default account (admin) and password (Admin@123) of the console port. 2. To prevent an unauthorized user to access the device with the default account and password, you are advised to change this password after your first login to the device. system-view [sysname] user-interface Console 0 [sysname-ui-Console0] authentication-mode local user admin password cipher *********

Setting the web password for the USG6000
The default user name and password (admin/Admin@123) of a web user are used for login by default. For system security purposes, change the web administrator password immediately after login. system-view [sysname] aaa [sysname-aaa] manager-user admin1 [sysname-aaa-manager-user-admin1] password Enter Password: Confirm Password: [sysname-aaa-manager-user-admin1] service-type web [sysname-aaa-manager-user-admin1] level 3

Setting the SSH password on the USG6000
Login through SSH improves the security of data transmission. Therefore, you are advised to log in through SSH. In addition, you are advised to use AAA for authentication. 1. Set the administrator IP addresses that can access the device remotely. The administrator cannot use IP addresses that are not specified in the ACL to remotely access the device through SSH. 2. Configure connection number limit on the VTY administrator interface. 3. Set the administrator account and password for login through SSH. system-view [sysname] aaa [sysname-aaa] manager-user admin1 [sysname-aaa-manager-user-admin1] ssh authentication-type password [sysname-aaa-manager-user-admin1] password Enter Password: Confirm Password: [sysname-aaa-manager-user-admin1] service-type ssh [sysname-aaa-manager-user-admin1] level 3 [sysname-aaa-manager-user-admin1] access-limit 1 4. Enable the STelnet service on the device. 5. Set the client service mode of the SSH account to STelnet.

Default user name and password of the console port on the USG6000
The default user name and password of the console port on the USG6000 are admin and Admin@123, respectively.

Method used to retrieve the console account password for the USG6000 series
If you have a Telnet or web account with permissions higher than Level 3, you can change the password to the console port after logging in through Telnet or the web UI. Telnet login is used as an example: 1. Log in to the device using a Telnet account. 2. Change the password of the console user. For example, change the user name and password to admin and Password@123, respectively: system-view [sysname] user-interface console 0 [sysname-ui-console0] authentication-mode local user admin password cipher Password@123 [sysname-ui-console0] return

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top