Setting the console password on the USG2000&5000

12

For the login through the console port, the account and password must be set.
1. During the first log, use the default account (admin) and password (Admin@123) of the console port.
2. To prevent an unauthorized user to access the device with the default account and password, you are advised to change this password after your first login to the device.
system-view
[sysname] user-interface Console 0
[sysname-ui-Console0] authentication-mode local user admin password cipher *********

Other related questions:
Setting the SSH password on the USG2000&5000
Login through SSH improves the security of data transmission. Therefore, you are advised to log in through SSH. In addition, you are advised to use AAA for authentication. 1. Set the administrator IP addresses that can access the device remotely. The administrator cannot use IP addresses that are not specified in the ACL to remotely access the device through SSH. 2. Configure connection number limit on the VTY administrator interface. 3. Set the administrator account and password for login through SSH. system-view [sysname] ssh user admin1 [sysname] ssh user admin1 authentication-type password [sysname] aaa [sysname-aaa] local-user admin1 password cipher ********* [sysname-aaa] local-user admin1 service-type ssh [sysname-aaa] local-user admin1 level 3 [sysname-aaa] local-user admin1 access-limit 1 4. Enable the STelnet service on the device. 5. Set the client service mode of the SSH account to STelnet.

Retrieving the console port login password on the USG2000&5000
Retrieve the console port login password on the USG2000&5000 as follows: In this case, you need to log in to the device through the web UI or Telnet. The operations are as follows (with user1 being the user that has forgotten the password): 1. Telnet to the device for the change: Login authentication Username:admin Password:********** Note: The max number of VTY users is 5, and the current number of VTY users on line is 1. NOTICE:This is a private communication system. Unauthorized access or use may lead to prosecution. system-view [USG] aaa [USG-aaa] local-user user1 password cipher password@123 //Indicates re-setting the password of account user1. Retrieve the console port login password as follows: system-view [USG5100]user-interface console 0 [USG5100-ui-console0]authentication-mode password cipher huawei@123

Setting the super password for the USG2000&5000
When a lower-level user is switched to a higher-level user, user identity authentication is required to prevent unauthorized access. That is, the password of the higher-level user is required. The super password command can be used to set the password used to switch a lower-level user to a higher-level user. An example is provided for setting the super password. # Configure the password to Abcd@1234 for switching from a lower-level user to a level-3 user. system-view [sysname] super password level 3 cipher Abcd@1234 Note: A configured password cannot be retrieved from the system. You should carefully keep the password in case that you may forget or lose it.

Default user name and password of the console port on the USG2000&5000
The default user name and password of the console port on the USG2000&5000 are admin and Admin@123, respectively.

Web password setting for the USG2000&5000 series
The default user name/password for login to the web UI is admin/Admin@123. For system security, as a web administrator, you are advised to change the password after login. system-view [sysname] aaa [sysname-aaa] local-user admin1 password irreversible-cipher ********* [sysname-aaa] local-user admin1 service-type web [sysname-aaa] local-user admin1 level 3

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top