Retrieving the Telnet login password on the USG6000

2

Retrieve the Telnet login password on the USG6000 as follows:
In this case, you need to log in to the device through the console port or web UI. The operations are as follows (with user1 being the user that has forgotten the password):
1. Change the password through the console port.

system-view

[USG6600]aaa

[USG6600-aaa]manager-user admin

[USG6600-aaa-manager-user-admin]password cipher password@123

//Indicates changing the password of the admin
account to password@123.


Retrieve the Telnet login password as follows:
system-view
[USG6600]user-interface vty 0 4
[USG6600-ui-vty0-4]authentication-mode password cipher huawei@123

Other related questions:
Retrieving the Telnet login password on the USG2000&5000
Retrieve the Telnet login password on the USG2000&5000 as follows: In this case, you need to log in to the device through the console port or web UI. The operations are as follows (with user1 being the user that has forgotten the password): 1. Change the password through the console port. Login authentication Username:admin Password:********** Note: The max number of VTY users is 5, and the current number of VTY users on line is 1. NOTICE:This is a private communication system. Unauthorized access or use may lead to prosecution. system-view [USG]aaa [USG-aaa] local-user user1 password cipher password@123 //Indicates re-setting the password of account user1. Retrieve the Telnet login password as follows: system-view [USG5100]user-interface vty 0 4 [USG5100-ui-vty0-4]authentication-mode password cipher huawei@123

Retrieving the web UI login password on the USG6000
Method of retrieving the web UI login password on the USG6000: Log in to the device through the console port or Telnet. The operations are as follows (user name admin is used as an example): system-view [USG6600]aaa [USG6600-aaa]manager-user admin [USG6600-aaa-manager-user-admin]password cipher password@123 //Indicates changing the password of the admin account to password@123.

How do I add a neighboring GK on the SMC1.0?
In the node management module of the SMC1.0 web interface, select a GK (GK 1) and add another GK (GK2) as the neighboring GK of GK 1 in the route table. To establish the neighboring relationship, you also need to add GK 1 as the neighboring GK of GK2. Route prefix: indicates the number prefix routed to the neighboring GK. IP address: indicates the IP address of the peer GK. Use the default values of other parameters.

Login method if the account and password are forgotten for the USG6000 series
Upon the factory delivery, default administrator account admin and password Admin@123 are provided for the access to the USG6000 series in three modes: Telnet, web UI, and console port.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top