Whether the USG6000 series supports the Telnet function by default


By default, the USG6000 series has the Telnet function disabled. You can enable it as required.

The enabling method is as follows:

Enter system view, return user view with Ctrl+Z.
[USG6600]telnet server enable

Other related questions:
Whether the Telnet function is enabled by default
By default, the Telnet server function is disabled. After logging in to the device through Telnet, you need to perform the following steps:
Step 1: Enable the Telnet service.
[huawei] telnet server enable //Enable the Telnet server.

Step2: Configure the IP address of the server.
[huawei] interface GigabitEthernet 0/0/0
[huawei-GigabitEthernet 1/0/0] ip address //Configure the login IP address.
[huawei-GigabitEthernet 1/0/0] quit

Step 3: Configure the login account and password of Telnet server.
[huawei] aaa
[huawei-aaa] local-user huawei password irreversible-cipher %^%#6W-mT:ZGe)0B*rMm,@#$LEyI;m_bQibe=46k.,#x$vk0EyLL%^%# //Create a local user, and set the user name to huawei and password to Hello@123.[huawei-aaa] local-user huawei privilege level 3 //3. Set the priority of the local user huawei to 3.
[huawei-aaa] local-user huawei service-type telnet //Set the service type to Telnet.
[huawei-aaa] quit

Step 4: Configure the verification mode of the user interface.
[huawei] user-interface vty 0 4 //Enter the user interface view of VTY0 to VTY4.
[huawei-ui-vty0-4] authentication-mode aaa //Configure the authentication mode of the VTY user interface as AAA.
[huawei-ui-vty0-4] quit

Whether the SLB function is enabled by default on the USG6000 series
The SLB function is disabled by default on the USG6000 series.

Whether the USG2000&5000 support the Telnet function
By default, the USG2000&5000 have the Telnet function enabled, and users can directly use the initial administrator account admin to log in to the device.

Whether the license is delivered with the USG6000 series by default
For the USG6000 series, the license must be purchased separately.

Whether the USG6000 series supports the interface bandwidth function
The USG6000 series supports the interface bandwidth function.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top