Browsers for logging in to the USG6000 through the web UI

3

Browsers for logging in to the USG6000 through the web UI
Before logging in to the USG6000 web UI, ensure that your PC uses one of the following browsers:
1. Internet Explorer 6.0-9.0
2. Firefox browser (recommended): 10.0 and later versions
3. Chrome browser: 17.0 and later versions
Note:
If you use the Internet Explorer, the recommended version is 7.0 or later.

Other related questions:
Requirements on THE browser used to log in to the web UI of the USG6000
Before logging in to the web UI, ensure that your PC uses one of the following browsers: Internet Explorer 6.0-9.0 Firefox browser (recommended): 10.0 and later versions Chrome browser: 17.0 and later versions If you use the Internet Explorer, the recommended version is 7.0 or later.

Method for configuring HTTPS login to the web UI of the USG6000
You can configure the HTTPS login to the web UI as follows:
Note: If you only enable the web function by running web-manager enable but do not enable the HTTPS service by running web-manager security enable, you cannot log in to the device.
1. Networking requirement
Configure a local authentication administrator webadmin for the NGFW and require that the administrator use HTTPS to log in to the web UI.

2. Configuration roadmap
a. Configure the web service for the device and enable the HTTPS service on the interface to allow the administrator to use HTTPS to log in to the web UI.
b. Create an administrator.
3. Operation procedure
system-view
a. Enable the web service.
Enable HTTPS.
[NGFW] web-manager security enable port 8443
Configure the timeout period for the web service.
[NGFW] web-manager timeout 5
By default, the web service timeout period is 10 minutes.
(Optional) Configure automatic web UI lockout upon 5 consecutive administrator login failures.
Note:
By default, the web UI will be added to the blacklist for 10 minutes (cannot be modified) after 3 consecutive authentication failures.
[NGFW] firewall blacklist authentication-count login-failed 5
Configure the IP address on GigabitEthernet 1/0/3 and enable the HTTPS service.
system-view
[NGFW] interface GigabitEthernet 1/0/3
[NGFW-GigabitEthernet1/0/3] ip address 10.3.0.1 255.255.255.0
[NGFW-GigabitEthernet1/0/3] service-manage enable
[NGFW-GigabitEthernet1/0/3] service-manage https permit
[NGFW-GigabitEthernet1/0/3] quit
Add the interface to the security zone.
[NGFW] firewall zone trust
[NGFW-zone-trust] add interface GigabitEthernet1/0/3
[NGFW-zone-trust] quit
b. Create an administrator.
Create an administrator and bind a role to it.
[NGFW-aaa] manager-user webadmin
[NGFW-aaa-manager-user-webadmin] password
Enter Password:
Confirm Password:
[NGFW-aaa-manager-user-webadmin] service-type web
[NGFW-aaa-manager-user-webadmin] access-limit 10
[NGFW-aaa-manager-user-webadmin] level 3
[NGFW-aaa-manager-user-webadmin] quit
Log in to the NGFW on the administrator PC.
Open the browser on the PC and access https://10.3.0.1:8443, the IP address of the device to be logged in to.
On the login page, enter the administrator's user name and password, respectively webadmin and Myadmin@123, and click Enter to enter the web UI.

Requirements on the browser used to log in to the web UI of the USG2000&5000
The web system supports multiple browsers. You can log in to the web system through either Firefox 2.0 (or later versions) or the Internet Explorer 6.0 (or later versions). When logging in to the web UI, note the following points: 1. When you log in to the web system by using the Internet Explorer 8.0 or 9.0, to make sure that contents can be properly displayed on the web page, select ToolsCompatibility View in the menu bar. 2. When you use the Internet Browser, do not set the security level too high; otherwise, the web page cannot be displayed. If you use the web proxy to access the web system, select ToolsInternet Options Advanced on the menu bar, and select Use HTTP 1.1 through proxy connections. Otherwise, the web page cannot be displayed. The previous options are examples from IE 6.0. 3. If you use Firefox, choose Tools OptionsContent on the menu bar and select Enable JavaScript. Then select ToolsOptionsPrivacy and Accept cookies from cites and Accept third-party cookies. Otherwise, the web page cannot be displayed. The previous options are examples from Firefox 3.6. 4. The web platform does not support the backward, forward, refresh buttons on a browser. If you use these buttons, the web page may return to the login page. 5. To ensure the normal display of the page after the version upgrade, you are advised to clear the browser cache and cookies and then access the page. Internet Explorer 6.0 is used as an example. On the menu bar of the Internet Explorer browser, select ToolsInternet Options. In Temporary Internet files on the General tab page, click Delete Cookies. Then click OK. In Temporary Internet files on the General tab page, click Delete Files. Select Delete all offline content and click OK.

Administrator account creation on the web UI of the USG6000 series
For the USG6000 series, on the web UI, choose System > Administrators > Administrators and click Add. Set the parameters one by one. If the operation succeeds, the administrator account is displayed in the administrator list. Repeat the previous steps to create other administrator accounts.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top