Descriptions of the web-manager and web-manager security commands on the USG

4

Descriptions of the web-manager and web-manager security commands are as follows:

Functions:

The web-manager enable command enables a web server.
Syntax
web-manager enable [ port port-number ]
web-manager security enable port port-number
Parameter description

security specifies the type of packets exchanged between the web browser and web server.
Packets fall into the following types:

1. security not selected: HTTP packets are exchanged between the web browser and web server, and the default port is 80.
2. security selected: HTTPS packets are exchanged between the web browser and web server, and the default port is 8443.
3. port port-number specifies the service port of the web server. The value is an integer ranging from 1025 to 50000.

Other related questions:
Disabling the web management service on the USG
Method for disabling the web management service on the USG: Run the undo web-manager enable command.

Web-managed S1700 series switches
The following S1700 series switches support web-based management: Web-managed switch model: S1728GWR-4P SNMP-based models: S1700-28GFR-4P-AC, S1700-52GFR-4P-AC, S1700-28FR-2T2P-AC, S1700-52FR-2T2P-AC, S1720-20GFR-4TP, and S1720-28GFR-4TP Only the S1700 series switches of which the name contains the letter w or F support web-based management. NMS-free switches do not support web-based management.

Failed to log in to the web interface of the management port.
If the BMC web interface is not displayed after you enter "http: //BMC IP address" in the address box, try "https: //BMC IP".

Failed to log in to the web management system of the IAD
To rectify the fault when you fail to log in to the web management system of the IAD, perform the following steps: Step 1 Verify that the IP address is reachable and that there is no firewall between the PC and the IAD. Step 2 Ensure that the IAD version is V300R001C07 or later. In versions earlier than V300R001C07, web access is not supported excluding IAD 208E V300R001C03. Step 3 Run the system soft-parameter http-switch on command to enable web access. The IAD104H supports this command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top