Administrator account creation on the CLI of the USG6000 series

11

For USG6000 V100R001, you can create an administrator account as follows:
1. Run the aaa command to enter the AAA view.
2. Run the manager-user abc command to create the administrator account abc and enter the administrator view.
3. In the administrator view, run the level 3 command to set the administrator level to 3.
4. Run the service-type { api | { ftp | ssh | telnet | terminal | web } * } command to set the administrator's service type.
5. Run the password cipher xxxx command to set an administrator password.

Other related questions:
Administrator account creation on the web UI of the USG6000 series
For the USG6000 series, on the web UI, choose System > Administrators > Administrators and click Add. Set the parameters one by one. If the operation succeeds, the administrator account is displayed in the administrator list. Repeat the previous steps to create other administrator accounts.

Default administrator account of the USG6000 series
The NGFW provides two default accounts: - System administrator account: admin/Admin@123. For the first time, you can use this account to log in to the USG6000 through the console port or web UI. - Auditor account: audit-admin/Admin@123. This account can be used to configure audit policies and view audit logs.

Reason for locking an account during NE creation
The possible cause is that the account is used by multiple users to log in to NEs, and as a result the account is locked. You can wait 15 minutes for the account to be unlocked.

What is the default administrator account
The NGFW provides two default accounts. -System administrator account admin and password Admin@123: You can use this account to log in to the device through console or web UI for first login. -Audit administrator account audit-admin and password Admin@123: This account is for configuring audit policies and viewing audit logs only.

Configuration of USG6000 series interworking with the ATIC on the CLI
The USG6000 series can be configured on the CLI to interwork with the ATIC. 1. Run the info-center atic ip-address command to enable the interworking with the ATIC and specify the IP address of the ATIC server. 2. Run the display info-center atic command to check whether the USG6000 is enabled to interwork with the ATIC and the ATIC server's IP address. After the USG6000 is configured to interwork with the ATIC server, it can send traffic anomaly logs to the ATIC server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top