Setting the web password for the USG6000

0

The default user name and password (admin/Admin@123) of a web user are used for login by default.
For system security purposes, change the web administrator password immediately after login.
system-view
[sysname] aaa
[sysname-aaa] manager-user admin1
[sysname-aaa-manager-user-admin1] password
Enter Password:
Confirm Password:
[sysname-aaa-manager-user-admin1] service-type web
[sysname-aaa-manager-user-admin1] level 3

Other related questions:
Setting the console password on the USG6000
For the login through the console port, the account and password must be set. 1. During the first log, use the default account (admin) and password (Admin@123) of the console port. 2. To prevent an unauthorized user to access the device with the default account and password, you are advised to change this password after your first login to the device. system-view [sysname] user-interface Console 0 [sysname-ui-Console0] authentication-mode local user maintain password cipher Password@123

Setting the SSH password on the USG6000
Login through SSH improves the security of data transmission. Therefore, you are advised to log in through SSH. In addition, you are advised to use AAA for authentication. 1. Set the administrator IP addresses that can access the device remotely. The administrator cannot use IP addresses that are not specified in the ACL to remotely access the device through SSH. 2. Configure connection number limit on the VTY administrator interface. 3. Set the administrator account and password for login through SSH. system-view [sysname] aaa [sysname-aaa] manager-user admin1 [sysname-aaa-manager-user-admin1] ssh authentication-type password [sysname-aaa-manager-user-admin1] password Enter Password: Confirm Password: [sysname-aaa-manager-user-admin1] service-type ssh [sysname-aaa-manager-user-admin1] level 3 [sysname-aaa-manager-user-admin1] access-limit 1 4. Enable the STelnet service on the device. 5. Set the client service mode of the SSH account to STelnet.

Setting the administrator password complexity on the USG6000
For security, the USG6000 series does not support modifying the password complexity.

Web password setting for the USG2000&5000 series
The default user name/password for login to the web UI is admin/Admin@123. For system security, as a web administrator, you are advised to change the password after login. system-view [sysname] aaa [sysname-aaa] local-user admin1 password irreversible-cipher ********* [sysname-aaa] local-user admin1 service-type web [sysname-aaa] local-user admin1 level 3

Retrieving the web UI login password on the USG6000
Method of retrieving the web UI login password on the USG6000: Log in to the device through the console port or Telnet. The operations are as follows (user name admin is used as an example): system-view [USG6600]aaa [USG6600-aaa]manager-user admin [USG6600-aaa-manager-user-admin]password cipher password@123 //Indicates changing the password of the admin account to password@123.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top