Disabling the web management service on the USG

11

Method for disabling the web management service on the USG:

Run the undo web-manager enable command.

Other related questions:
Descriptions of the web-manager and web-manager security commands on the USG
Descriptions of the web-manager and web-manager security commands are as follows: Functions: The web-manager enable command enables a web server. Syntax web-manager enable [ port port-number ] web-manager security enable port port-number Parameter description security specifies the type of packets exchanged between the web browser and web server. Packets fall into the following types: 1. security not selected: HTTP packets are exchanged between the web browser and web server, and the default port is 80. 2. security selected: HTTPS packets are exchanged between the web browser and web server, and the default port is 8443. 3. port port-number specifies the service port of the web server. The value is an integer ranging from 1025 to 50000.

How to disable the web function on an AR router
How to disable the web function on an AR router? For routers that support web NMS, disable the HTTP server on the routers to disable the web function. Specific method is as follows: [Huawei] undo http server enable //Disable the HTTP service. [Huawei] undo http secure-server enable //Disable the HTTPS service.

How to disable the web-based network management system on a switch
To disable the web-based network management system on a switch, disable the HTTP server on the switch. Run the following commands: system-view [HUAWEI] undo http server enable In V100R006 and later versions, if secure HTTP (HTTPS) is enabled, run the following commands to disable HTTP: system-view [HUAWEI] undo http secure-server enable

Disable the NTP service on the eBackup
The NTP service cannot be disabled after it is enabled.

Disabling the NTP service on the firewall
Disable the NTP service on the firewall as follows: 1. Run the system-view command to enter the system view. 2. Run the following commands to disable the NTP service. a. Run the ntp-service [ ipv6 ] disable command to disable the NTP service. By default, the NTP function is enabled. b. Run the ntp-service [ ipv6 ] server disable command to disable the function that the FW serves as the NTP server. By default, the NTP server function is enabled.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top