Setting scheduled restart of the USG2000&5000&6000

0

Configure scheduled device restart as follows:
Run the schedule reboot command. For example:

# The current time is 15:50. Set the NGFW to restart at 22:00 this night.

schedule reboot at 22:00
Info: System will reboot at 22:00:00 2009/07/18 (in 6 hours and 10 minutes)
confirm? [Y/N] :y

Other related questions:
Displaying the time for each restart of the USG2000&5000&6000
Display the board model as follows: USG2000&5000: Enter the diagnosis mode and run the display reset reason command to display the board model: system-view Enter system view, return user view with Ctrl+Z. [USG5100] diagnose Warning: Commands in the diagnose view are used for troubleshooting. Running certain Commands in the diagnose view may cause device anomaly or service interruption. Use such commands under the instructions of HUAWEI technical engineers. [USG5100-diagnose]display reset reason Time Reset Reason 15-01-28 10:50:28 Command reboot 15-01-05 11:33:54 Command reboot 15-01-05 10:53:37 Command reboot 14-12-16 19:46:08 Command reboot 14-11-13 16:15:08 Power off 14-08-19 17:02:36 Reset key reboot 14-08-19 16:47:32 Power off 00-04-03 05:02:15 Power off 00-04-01 23:55:07 Power off USG6000: Enter the diagnosis mode and run the display black-box information startup command to query: system-view [USG6600] diagnose [USG6600-diagnose]display black-box information startup Reason ID Slot Date(Y/M/D) Time(H/M/S) Reason Para1 Para2 5 0 15/04/15 08:38:22 Power off 0 0 4 0 15/04/10 08:37:57 Power off 0 0 3 0 15/03/06 17:14:20 Power off 0 0 2 0 15/03/04 10:13:33 Software reboot 0 0 1 0 15/03/04 10:11:20 Command reboot 0 0 0 0 15/01/08 15:37:26 Command reboot 0 0

Default levels of the USG2000&5000&6000 administrators
The default level of the administrators of all USG series is empty. You need to configure the level and permission of each user.

Configuring telneting to other devices on the USG2000&5000&6000
USG2000&5000&6000  configure telneting to other devices as follows:

To manage other intranet devices with the firewall as a springboard, perform as follows:

telnet 192.168.101.231 
14:33:04  2011/03/26 
Trying 192.168.101.231 ... 
Press CTRL+T to abort

In this way, you can perform operations on other devices.

Whether the USG2000&5000&6000 support reflective ACLs
The USG6650 and USG5120 do not support reflective ACLs for now.

The USG2000 & 5000 & 6000 series is configured with port mirroring.
Note: Enabling the port mirroring feature helps to locate the network, but because the function may affect the performance of the device to a certain extent, use it with caution. After the network problem is finished, turn off port mirroring. To prevent the problem that the mirroring packets can not be received due to the different transmission rate of the interface, make sure that the transmission rate of the observing port and the mirroring port are the same. Steps 1. Run the system-view command to enter the system view. 2, the implementation of the command observing-port observing-port, configure the observation port. The observing port is a non-service interface for transmitting traffic packets that are mirrored to the port. You can observe the packets passing through the corresponding port through the observing port. Run the port-mirroring mirroring-port {both | inbound | outbound} observing-port [acl-number acl-number] command to enable port mirroring. The mirroring port is a service port for sending and receiving service packets. Before you enable port mirroring, the corresponding observing port must already be configured with the observing-port command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top