Default HTTPS service port number of the firewall

6

The default HTTPS service port number of the firewall is 8443.

Other related questions:
Number of default virtual firewalls
The default virtual firewalls are as follows: -In versions earlier than V300R001SPC500, the system supports two virtual firewalls by default. After a license is purchased, the number of virtual firewalls is specified in the license. -In V300R001SPC500 and later versions, the system supports 10 virtual firewalls by default. After a license is purchased, the number of virtual firewalls is the sum of the number of virtual firewalls supported by the device and the number of virtual firewalls specified in the license.

How to enable the web function on an AR router
The methods of enabling the web function on an AR router are as follows: Method 1: Default web login 1. Connect a PC to the router over the management interface through a network cable. 2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254. 3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 4. Enter login information. 5. Configure the router through the web NMS page. Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method: Method 2: Non-default web login 1. Connect a PC to the router over the CON/AUX interface through a console configuration cable. 2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters. 3. Press Enter until the following information is displayed to remind users of configuring a verification code. 4. Connect a PC to the router over the management interface through a network cable. 5. Configure an IP address for the router for management. 6. Enable the web service. 7. Configure an HTTPS user and a user level. 8. Configure an IP address for the PC. 9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page. 10. Configure the router through the web NMS page.

SNMP port numbers of S series switches
After SNMP is configured on S series switches (except S1700), UDP ports are enabled by default. By default, the port number for SNMP and NMS connection is 161 and the port number for sending alarms to the NMS is 162.
You can use the snmp-agent udp-port port-num command to configure the port number for SNMP and NMS connection.

How to disable the web function on an AR router
How to disable the web function on an AR router? For routers that support web NMS, disable the HTTP server on the routers to disable the web function. Specific method is as follows: [Huawei] undo http server enable //Disable the HTTP service. [Huawei] undo http secure-server enable //Disable the HTTPS service.

Does the AR support the web
Starting from V200R002C01, the AR supports the web platform. You can use the web platform to manage and maintain AR routers on the GUI. V200R005C20SPC200 is recommended. For details, see Access Router Product Information Center.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top