Method for changing the web service port of the USG6000 series on the web UI

3

You can change the web service port number of the USG6000 series on the web UI as follows:
1. Choose System > Administrator > Setting.
2. Select Enable corresponding to HTTP Service or HTTPS Service.
3. Enter the port number in HTTP Service Port or HTTPS Service Port.
The default HTTP port number is 80, and the default HTTPS port number is 8443.
4. Click Apply.
After logging in to the device using HTTP, you cannot disable the HTTP service or change the HTTP service port. After logging in to the device using HTTPS, you cannot disable the HTTPS service or change the HTTPS service port.

Other related questions:
Method for changing the web service port of the USG2000&5000 series on the web UI
You can change the web service port number of the USG2000&5000 series on the web UI as follows: 1. Choose System > Administrator > Setting. 2. Select Enable corresponding to HTTP Service or HTTPS Service. 3. Enter the port number in HTTP Service Port or HTTPS Service Port. The default HTTP port number is 80, and the default HTTPS port number is 8443. 4. Click Apply. After logging in to the device using HTTP, you cannot disable the HTTP service or change the HTTP service port. After logging in to the device using HTTPS, you cannot disable the HTTPS service or change the HTTPS service port.

Method for configuring HTTPS login to the web UI of the USG6000
You can configure the HTTPS login to the web UI as follows:
Note: If you only enable the web function by running web-manager enable but do not enable the HTTPS service by running web-manager security enable, you cannot log in to the device.
1. Networking requirement
Configure a local authentication administrator webadmin for the NGFW and require that the administrator use HTTPS to log in to the web UI.

2. Configuration roadmap
a. Configure the web service for the device and enable the HTTPS service on the interface to allow the administrator to use HTTPS to log in to the web UI.
b. Create an administrator.
3. Operation procedure
system-view
a. Enable the web service.
Enable HTTPS.
[NGFW] web-manager security enable port 8443
Configure the timeout period for the web service.
[NGFW] web-manager timeout 5
By default, the web service timeout period is 10 minutes.
(Optional) Configure automatic web UI lockout upon 5 consecutive administrator login failures.
Note:
By default, the web UI will be added to the blacklist for 10 minutes (cannot be modified) after 3 consecutive authentication failures.
[NGFW] firewall blacklist authentication-count login-failed 5
Configure the IP address on GigabitEthernet 1/0/3 and enable the HTTPS service.
system-view
[NGFW] interface GigabitEthernet 1/0/3
[NGFW-GigabitEthernet1/0/3] ip address 10.3.0.1 255.255.255.0
[NGFW-GigabitEthernet1/0/3] service-manage enable
[NGFW-GigabitEthernet1/0/3] service-manage https permit
[NGFW-GigabitEthernet1/0/3] quit
Add the interface to the security zone.
[NGFW] firewall zone trust
[NGFW-zone-trust] add interface GigabitEthernet1/0/3
[NGFW-zone-trust] quit
b. Create an administrator.
Create an administrator and bind a role to it.
[NGFW-aaa] manager-user webadmin
[NGFW-aaa-manager-user-webadmin] password
Enter Password:
Confirm Password:
[NGFW-aaa-manager-user-webadmin] service-type web
[NGFW-aaa-manager-user-webadmin] access-limit 10
[NGFW-aaa-manager-user-webadmin] level 3
[NGFW-aaa-manager-user-webadmin] quit
Log in to the NGFW on the administrator PC.
Open the browser on the PC and access https://10.3.0.1:8443, the IP address of the device to be logged in to.
On the login page, enter the administrator's user name and password, respectively webadmin and Myadmin@123, and click Enter to enter the web UI.

Default login address and method used to restore the factory settings for the USG6000 series
By default, the USG6000 series can be logged in through the management interface GigabitEthernet 0/0/0. The default login address is https://192.168.0.1:8443. On the web UI, choose System > Configuration File Management and click Restore Factory Default to restore the factory settings.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top