Default log level on the USG6000

6

The default level of the log information on the USG6000 is Warning.

Other related questions:
Whether the USG6000 has the logging function enabled by default
By default, the logging function of the USG6000 is enabled.

Viewing the administrator level on the USG6000
View the administrator level on the USG6000 as follows: [USG6600]display manager-user username admin 17:47:00 2015/04/21 ---------------------------------------------------------------------------- Username : admin Password : **************** State : Active Service-type : web ftp telnet terminal ssh ACL-number : - Access-limit : No Online-number : 1 User-level : 15 FTP-directory : hda1: Ssh authentication: any Ssh service : stelnet Ssh RSA-key : -

Changing the administrator level on the USG6000
Change the administrator level on the USG6000 as follows: HRP_Asystem-view Enter system view, return user view with Ctrl+Z. HRP_A[USG6600-1]aaa HRP_A[USG6600-1-aaa]manager-user admin HRP_A[USG6600-1-aaa-manager-user-admin]level ? INTEGER<0-15> Value //Select a level ranging from 0 to 15 here. HRP_A[USG6600-1-aaa-manager-user-admin]level 15 //This command indicates setting the permission of the admin account to level 15.//

Default levels of the USG2000&5000&6000 administrators
The default level of the administrators of all USG series is empty. You need to configure the level and permission of each user.

USG6000 log saving
USG6000 log saving modes 1. Check whether the information center is enabled. The information center can record logs only after it is enabled. By default, it is enabled. [sysname] display info-center Information Center:enabled 2. Enable the information center. [sysname] info-center enable 3. Configure the IP address of the log server and the source interface for sending log information. [sysname] info-center loghost x.x.x.x [sysname] info-center loghost source GigabitEthernet 1/0/1 (Optional) Configure the log output in binary format. You also need to configure the eSight NMS server to resolve logs. a. Configure the IP address and port number of the eSight NMS server. [sysname] data-flow loghost 1 ip-address 10.1.1.2 port 9903 b. Configure the IP address and port number used by the device to send binary logs to the eSight NMS server. [sysname] data-flow loghost source ip-address 10.1.1.1 source-port 1617

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top