Whether the USG6000 has the logging function enabled by default

0

By default, the logging function of the USG6000 is enabled.

Other related questions:
Whether the SLB function is enabled by default on the USG6000 series
The SLB function is disabled by default on the USG6000 series.

Whether the Telnet function is enabled by default
By default, the Telnet server function is disabled. After logging in to the device through Telnet, you need to perform the following steps:
Step 1: Enable the Telnet service.
[huawei] telnet server enable //Enable the Telnet server.

Step2: Configure the IP address of the server.
[huawei] interface GigabitEthernet 0/0/0
[huawei-GigabitEthernet 1/0/0] ip address 10.1.1.1 255.255.255.0 //Configure the login IP address.
[huawei-GigabitEthernet 1/0/0] quit
[huawei]


Step 3: Configure the login account and password of Telnet server.
[huawei] aaa
[huawei-aaa] local-user huawei password irreversible-cipher %^%#6W-mT:ZGe)0B*rMm,@#$LEyI;m_bQibe=46k.,#x$vk0EyLL%^%# //Create a local user, and set the user name to huawei and password to Hello@123.[huawei-aaa] local-user huawei privilege level 3 //3. Set the priority of the local user huawei to 3.
[huawei-aaa] local-user huawei service-type telnet //Set the service type to Telnet.
[huawei-aaa] quit
[huawei]

Step 4: Configure the verification mode of the user interface.
[huawei] user-interface vty 0 4 //Enter the user interface view of VTY0 to VTY4.
[huawei-ui-vty0-4] authentication-mode aaa //Configure the authentication mode of the VTY user interface as AAA.
[huawei-ui-vty0-4] quit
[huawei]

Whether web login is enabled by default for the USG6000 series
By default, HTTP- and HTTPS-based web services are enabled. The device allows administrators to log in to the web UI through HTTP and HTTPS.

Whether the USG6000 series supports the Telnet function by default
By default, the USG6000 series has the Telnet function disabled. You can enable it as required. The enabling method is as follows: sys Enter system view, return user view with Ctrl+Z. [USG6600]telnet server enable

Whether the SLB function is enabled by default on the USG9000 series
The SLB function is disabled by default on the USG9000 series.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top