Configuring the USG6000 to access the Internet through a static IP address

35

Perform as follows to enable the USG6000 to access the Internet through a static IP address:
Search for CLI: Example for Accessing the Internet Using a Static IPv4 Address in USG6000 Product Documentation.

Other related questions:
Allow specified IP addresses to access the Internet through an interface on an S series switch
You can configure an ACL-based traffic policy and apply the traffic policy to an interface on an S series switch to allow specified IP addresses to access the Internet through the interface. For example, configure GE0/0/1 to allow only the user with the IP address of 1.1.1.2 and prevent all other users to access the Internet. [HUAWEI] acl number 3030 [HUAWEI-acl-adv-3030] rule permit ip source 1.1.1.2 0 [HUAWEI-acl-adv-3030] quit [HUAWEI] acl number 3031 [HUAWEI-acl-adv-3031] rule permit ip [HUAWEI] traffic classifier test1 [HUAWEI-classifier-test1] if-match acl 3030 [HUAWEI] traffic classifier test2 [HUAWEI-classifier-test2] if-match acl 3031 [HUAWEI] traffic behavior test1 [HUAWEI-behavior-test1] permit [HUAWEI] traffic behavior test2 [HUAWEI-behavior-test2] deny [HUAWEI] traffic policy test [HUAWEI-trafficpolicy-test] classifier test1 behavior test1 [HUAWEI-trafficpolicy-test] classifier test2 behavior test2 [HUAWEI] interface gigabitethernet 0/0/1 [HUAWEI-GigabitEthernet0/0/1] traffic-policy test inbound

Selecting certain IP addresses to access the server through the CLI of the USG6000
On the CLI of the USG6000 series, configure a security policy, set the condition to source address and the action to permit.

Selecting certain IP addresses to access the server through the web UI of the USG6000
On the web UI of the USG6000 series, choose Policy > Security Policy, select the policy to be modified, click Add, and configure the security policy to allow a specified source IP address to access the server.

Whether AR routers support the MAC address configuration to control Internet access through the web platform
AR routers support the MAC address configuration to control Internet access through the web platform. On the web platform, choose QoS > Traffic Management. Create traffic policy and bind it to the traffic classifier based on the Layer 2 ACL.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top