Uploading and downloading application behavior control files for the USG6000 series


On the USG6000 series devices, the sizes of uploaded and downloaded files can be controlled by an application behavior file.
Configure HTTP and FTP behavior control files. If file upload or download is allowed, configure an alarm threshold and a blocking threshold to control the size of uploaded or downloaded files.
Alarm threshold: When the size of an uploaded or downloaded file reaches the alarm threshold, the system generates a log to notify the device administrator.
Blocking threshold: When the size of an uploaded or downloaded file reaches the blocking threshold, the system blocks the uploaded or downloaded file and generates a log to notify the device administrator.

Other related questions:
Uploading files through FTP on the USG6000
The configuration roadmap for FTP file upload is as follows: The device serves as the FTP server, and no independent software shall be installed. Configuration on the device is required. Note: When you upload a file to the device from the configuration terminal, and the device has a file with the same name, no information is prompted, and the original file is directly overwritten. To save the original file, run the rename command to change the file name before file upload. 1. Enable FTP and configure the FTP user name, password, and FTP path. system-view [sysname] ftp server enable Info: Start FTP server [sysname] aaa [sysname-aaa] manager-user ftpuser [sysname-aaa-manager-user-ftpuser] password Enter Password: Confirm Password: [sysname-aaa-manager-user-ftpuser] service-type ftp [sysname-aaa-manager-user-ftpuser] level 3 [sysname-aaa-manager-user-ftpuser] ftp-directory hda1:/ Note: The password configured on the device must meet the password strength requirements. It is recommended that the password contain at least three types of such characters as case-sensitive letters, digits, and special characters. Local users for FTP need to run the ftp-directory command to configure the FTP path to save the file on the device. 2. Run the ftp command to log in to the device from the configuration terminal. Run the put command to upload the file to the device. This part uses a Windows PC as an example: Choose Start > Run, enter cmd, and click OK. C:\Documents and Settings\Administrator> ftp User ( ftpuser Password: 230 User logged in. ftp>put vrpcfg.cfg /Upload the file to the device. ftp> lcd /You can display the file upload path. Local directory now C:\Documents and Settings\Administrator. ftp> Note: Administrator is the default OS user name. You can set different user names. You can run the lcd command to query the storage path for the backup configuration file. Commands on different FTP clients may differ due to different OSs. For details, refer to related OS documents.

How do WLAN devices upload or download files using FTP
To enable a WLAN device to upload or download files using FTP, ensure that a local PC and the WLAN device can communicate with each other. A WLAN device functions as an FTP server and a PC functions as an FTP client. The IP address of the WLAN device is The configuration method is as follows: 1. Enable FTP and configure an FTP user for the WLAN device. [Huawei] sysname FTPServer [FTPServer] ftp server enable //Enable the FTP service. [FTPServer] aaa [FTPServer-aaa] local-user admin1234 password irreversible-cipher Helloworld@6789 [FTPServer-aaa] local-user admin1234 privilege level 15 [FTPServer-aaa] local-user admin1234 service-type ftp [FTPServer-aaa] local-user admin1234 ftp-directory flash: [FTPServer-aaa] quit [FTPServer] quit 2. Connect the WLAN device to a local PC using FTP and transfer a file. The following uses the Windows XP operating system as an example: C:\Documents and Setting\Administrator> ftp //Connect to an FTP server. Connected to 220 FTP service ready. User ( admin1234 //Enter the user name. 331 Password required for admin1234 Password: //Enter the password. 230 User logged in. Configure the binary transfer mode and specify the directory on the local PC. ftp> binary //Set the file transfer mode to the binary mode. 200 Type set to I. ftp> lcd c:\temp //Set the working directory for the PC. Local directory now C: ftp> get vrpcfg.cfg //Download the vrpcfg.cfg file to the PC. ftp> put vrpcfg.cfg //Upload the vrpcfg.cfg file from the PC to the WLAN device. File transfer using FTP is simple but may bring security risks. Exercise caution when using FTP for file transfer.

How do I configure the file upload and download size and rate limits for the UMServer of the ECS3.0?
Log in to the BMU, choose Functions Maintenance > eSpace Maintenance > Client Parameter Control, and change the maximum size of a file that can be transferred. The maximum file size is 409600 KB. The file transmission rate is not controlled by the BMU.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top