UTM license support on the USG2000 and USG5000

7

UTM license support on the USG2000 and USG5000

USG5500:
The intrusion prevention system (IPS), antivirus, real-time blackhole list (RBL), and remote URL predefined category query functions are unavailable when the license is not activated. The upgrade and remote query services are under license control (1�? years). The upgrade and remote query services are unavailable after the license expires. However, the IPS, antivirus, and RBL functions are still available.
The mail filtering, web filtering, search keyword filtering, and FTP filtering functions are unavailable when the license is not activated.
USG2110-X, USG2100, USG2200, USG5100, USG2200 HSR, and USG5100 HSR:
The IPS, antivirus, RBL, and remote URL predefined category query functions are unavailable when the license is not activated. The upgrade and remote query services are under license control (1�? years). The upgrade and remote query services are unavailable after the license expires. However, the IPS, antivirus, and RBL functions are still available.
The mail filtering, web filtering, search keyword filtering, and FTP filtering functions (supported only by the USG2200, USG5100, USG 2200 HSR, and USG5100 HSR) are unavailable when the license is not activated. These functions are available when an official license is activated.

Other related questions:
Whether the UTM function is available on the USG2000 and USG5000
The UTM function can be used only after a license is purchased and activated.

Whether the USG2000 and USG5000 can switch to the UTM mode
The USG2000 and USG5000 can switch to the UTM mode. When the software operates in firewall mode, the UTM function is unavailable. When the software operates in UTM mode, all functions are available. By default, the device operates in firewall mode. Procedure: 1. Run system-view to access the system view. 2. Run runmode { firewall | utm } to configure the operating mode. Warning: Saving configurations consumes certain system resources, which will affect the performance of certain services. If configurations are not saved,they will be lost after the system restarts. The system will change its running mode and restart. "Save configurations"? [Y/N] Enter Y to save the configurations and N not to save the configurations. Warning: Are you sure to switch the running mode and restart the device? [Y/N] Enter Y to restart the system and switch the operating mode, and N not to restart the system or switch the operating mode. Note: After the operating mode is switched, the device needs to be restarted. Therefore, switch the operating mode in off-peak hours. Before switching the operating mode to UTM, disable the direct fragmented packet forwarding and fragment packet discarding functions. This is because if either of the functions is enabled, fragmented packets are directly forwarded or discarded without UTM detection. Command for disabling the fragmented packet forwarding function: undo firewall fragment-forward enable

SLB algorithms supported by the USG2000 and USG5000 series
Supports round robin, weighted round robin, least connections, source address hash, and weighted intelligent connections.

Whether the USG2000 and USG5000 support the authorized ARP
The USG2000 and USG5000 support the authorized ARP.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top