Supported ports of the H832PDIA board

71

The H832PDIA power board provides the following ports to supply power for the backplane and, through the backplane, power the service boards, control board, and fan monitoring board.


  • 0 (RTN(+)/NEG(-), OT terminal): introduces one input of -48 V DC (0) power to the H832PDIA DC power board and is connected to the DC power cable.

  • 1 (RTN(+)/NEG(-), OT terminal): introduces one input of -48 V DC (1) power to the H832PDIA DC power board and is connected to the DC power cable.

Other related questions:
Whether ports on the TN52TOG boards support autonegotiation
TN52TOG boards support only the 1000M full-duplex mode but not the autonegotiation mode.

Ports of ITL boards
Ports of ITL boards include the following: TE (C_EVEN multiplexed signal) RE (C_EVEN multiplexed signal) TO (C_ODD multiplexed signal) RO (C_ODD multiplexed signal)

Port working modes supported by an EMS2 board on an OSN 3500
Port working modes supported by an EMS2 board on an OSN 3500: 1. GE electrical ports: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex 2. GE optical ports: auto-negotiation and 1000M full-duplex 3. FE electrical ports: auto-negotiation, 100M full-duplex, 100M half-duplex, 10M full-duplex, and 10M half-duplex (An EMS2 board supports FE electrical ports when it works with an ETF8 board.) 4. FE optical ports: 100M full-duplex (An EMS2 board supports FE optical ports when it works with an EFF8 board.)

Whether the USG9000 series supports cross-board port mirroring
The USG9000 series does not support cross-board port mirroring.

Does the USG9000 series supports cross-board port mirroring?
The USG9000 series does not support the configuration of cross-board port mirroring

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top