Configuring traffic shaping on interfaces of the USG6000 series

47

Traffic shaping can be configured on Ethernet interfaces, Eth-Trunk interfaces, POS interfaces, and IP-Trunk interfaces.

Other related questions:
Traffic shaping in the QoS function of the USG6000 series
Traffic shaping aims to limit the normal traffic and burst traffic of a connection that flow out of a network so that packets can be forwarded at an even speed. Traffic shaping is a type of measure for actively adjusting the outgoing traffic rate.

Can traffic policing and traffic shaping be configured on an interface in the outbound direction
Traffic policing (qos car) affects traffic shaping (qos gts). It is recommended that the two commands should be not configured on an interface simultaneously.

Differences between traffic shaping and traffic policing in the QoS function of the USG6000 series
Traffic shaping differs from traffic policing in the following aspects: �?Traffic shaping involves caching packets that exceed the traffic specifications in traffic policing. Cached packets are forwarded when there are sufficient tokens in the token bucket. �?Traffic shaping may increase the delay whereas traffic policing does not.

What does shaping active in the Enqueue field mean
If Shaping Active is in the Enqueue field, traffic shaping is configured in the traffic policy.
  • -The value Shaping Active:NO indicates that traffic does not exceed the traffic shaping threshold. Traffic shaping is not performed.
  • -The value Shaping Active:YES indicates that traffic has exceeded the traffic shaping threshold. Traffic shaping has been performed.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top