Whether USG firewalls support the aging time configured for MAC address entries

10

The USG2000 and USG5000 support the aging time configured for MAC address entries.

Other related questions:
Method used to configure the aging time configured for MAC address entries on USG firewalls
Run the mac-address aging-time seconds command to configure the aging time for a dynamic MAC address entry. The value of seconds is 0 or ranges from 30s to 65535s. If seconds is set to 0, the MAC address entry is not aged. By default, the aging time for a dynamic MAC address entry is set to 300s. The aging time of an MAC address table is for dynamic entries only. Non-dynamic entries are not aged.

Whether USG firewalls support static MAC address entries
The USG firewalls support static MAC address entries.

Whether USG firewalls support dynamic MAC address entries
The USG firewalls support dynamic MAC address entries.

Whether USG firewalls support blackhole MAC address entries
The USG firewalls support blackhole MAC address entries.

Method used to configure blackhole MAC address entries on USG firewalls
Blackhole MAC address entries are a special type of MAC addresses that are manually configured. A device discards a packet if the destination MAC address in the packet is a blackhole MAC address. To configure a blackhole MAC address entry, in the system or interface view, run the mac-address blackhole mac-address interface-type interface-number vlan vlan-id command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top