Whether the USG2000&5000 support dual-egress

14

Dual-egress is supported. Note that you shall assign interfaces to security zones and configure related security polices.

Other related questions:
Whether the USG2000&5000 support capturing packets
You can enable the packet capture function on the USG2000&5000 as follows: 1. Configure the packet capture queue. [USG] packet-capture all-packet queue 0 interface GigabitEthernet 0/0/1 2. Enable the packet capture function. [USG] packet-capture startup manual 3. Save packets in the specified queue as file 1.cap on the device. The default directory is hda1:/. [USG] packet-capture queue 0 to-file 1.cap 4. Use FTP to download file 1.cap from the device, use the packet capture software to open the file, and analyze the captured packets. 5. Clear the packet capture queue and release the memory. After confirming that the host has completed receiving the packets, delete all packets from the queue. reset packet-capture queue 0

Whether the USG2000&5000 support the Telnet function
By default, the USG2000&5000 have the Telnet function enabled, and users can directly use the initial administrator account admin to log in to the device.

Whether the USG2000&5000&6000 support reflective ACLs
The USG6650 and USG5120 do not support reflective ACLs for now.

Whether the USG2000&5000 series supports threshold learning
No.

Whether the USG2000&5000 supports IP spoofing attack defense
Yes. When the USG2000&5000 works in transparent or multi-egress mode, or policy-based routing is applied, IP spoofing attack defense cannot be configured.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top