Whether the USG2000 and USG5000 support one-way configuration for the same network segment

7

On the firewall, the ACL can be used to block TCP packets to implement one-way configuration. However, this does not apply to packets of other types.

Other related questions:
Whether the USG2000 or USG5000 supports configuration using the CLI
The USG2000 or USG5000 supports configuration using the CLI.

Whether the USG6330 supports two consecutive same network segments
Yes. This can be implemented through NAT. However, this is not recommended.

Whether USG firewalls support IP addresses in the same network segment configured for different interfaces
The USG2000, USG5000, and USG6000 do not support IP addresses in the same network segment configured for different interfaces. However, primary and secondary IP addresses of the same interface can be in the same network segment.

Whether two same network segments can be configured for the USG6000
Yes. This configuration can be achieved by means of NAT. However, this configuration is not recommended.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top