Configuring interfaces for the USG6000 series

3

Configure the IP address and mask on the USG6000 and assign the interface to a security zone.

Other related questions:
Whether the USG6000 series supports the interface bandwidth function
The USG6000 series supports the interface bandwidth function.

Configuring traffic shaping on interfaces of the USG6000 series
Traffic shaping can be configured on Ethernet interfaces, Eth-Trunk interfaces, POS interfaces, and IP-Trunk interfaces.

Configuration of using a non-management interface to manage the USG6000 series on the CLI
To manage the USG6000 series through a non-management interface, you can configure the CLI as follows: # On GigabitEthernet 1/0/1, configure to allow the administrator to access the device using HTTP. system-view [sysname] interface GigabitEthernet 1/0/1 [sysname-GigabitEthernet1/0/1] service-manage http permit This configuration has a higher priority than security policies. After enabling access management on the interface, even if the security policy between the local zone and the interface locating security zone is disabled, as an administrator, you can still log in to the device through the interface.

Fixed interfaces of the USG6000
The USG6000 is delivered with diversified interfaces (with fixed interfaces being one type of standard interfaces). The standard configurations on various models are as follows: -USG6310/6320/6510-SJJ: one console interface (RJ45), one USG 2.0 interface, and eight 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration. -USG6306/6308/6330/6350/6360/USG6507/6530: one out-of-band management interface (RH45), one console interface (RJ45), one USB 2.0 interface, two GE combo interfaces, and four 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration. -USG6370/6380/6390/6620/6630: one out-of-band management interface (RH45), one console interface (RJ45), two USB 2.0 interfaces, four GE Ethernet optical interfaces, and eight 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration. -USG6650/6660: one out-of-band management interface (RJ45), one console interface (RJ45), one console interface (Mini USB), two USB 2.0 interfaces, eight GE optical interfaces, eight 10/100/1000M autosensing Ethernet electrical interfaces, and two 10GE optical interfaces in standard configuration. -USG6670/6680: one out-of-band management interface (RJ45), one console interface (RJ45), one console interface (Mini USB), two USB 2.0 interfaces, eight GE optical interfaces, sixteen 10/100/1000M autosensing Ethernet electrical interfaces, and four 10GE optical interfaces in standard configuration.

Whether the management interface of the USG6000 supports VRRP
The USG6000 management interface supports configuring VRRP.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top