Adding a POS interface to another IP-Trunk interface on the USG9000

5

A POS interface of the USG9000 can be added to only one IP-Trunk interface. To add it to another IP-Trunk interface, you must first remove it from the original IP-Trunk interface.

Other related questions:
Adding a POS interface to another IP-Trunk interface on the USG6000
A POS interface of the USG6000 can be added to only one IP-Trunk interface. To add it to another IP-Trunk interface, you must first remove it from the original IP-Trunk interface.

Can a converted interface be added to an Eth-Trunk
Converted interfaces can be added to an Eth-Trunk. The configuration method is the same as that for adding a physical interface to an Eth-Trunk. # Add converted interface 40GE1/0/1:1 to Eth-Trunk2. system-view [~HUAWEI] interface eth-trunk 2 [*HUAWEI-Eth-Trunk2] trunkport 40ge 1/0/1:1 [*HUAWEI-Eth-Trunk2] commit

Whether the firewall supports adding Eth-Trunk to a link group
Adding the Eth-Trunk interface to the link group on the USG The Eth-Trunk interface can be added to the link group. The link group status is Down only when all member interfaces of the Eth-Trunk are Down.

Does the LTE cellular interface support PPP
The LTE cellular interface supports PPP. The following physical interfaces also support PPP: - Synchronous or asynchronous serial interface working in synchronous mode (the interface type is the serial interface) - Async interface working in protocol mode - Serial interfaces formed by CE1/PRI or CT1/PRI interfaces, which have the same logical features as synchronous serial interfaces - Serial interfaces formed by CE3 or CT3 interfaces, which have the same logical features as synchronous serial interfaces - Serial interfaces formed by E1-F or T1-F interfaces, which have the same logical features as synchronous serial interfaces - Serial interfaces formed by E1/T1 channels that are channelized from a CPOS interface, which have the same logical features as synchronous serial interfaces - Cellular interfaces - ISDN BRI interfaces - POS interfaces Note: For LTE cellular interfaces, only the E392 data cards support the link-protocol ppp command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top