Configuring the interface rate on the USG2130BSR

5

You can set the device interface rate through the web UI of the USG2130BSR.
1. Choose Network > Interface.
2. Click Edit in the line of the interface to be configured.
3. Select Advanced.

Other related questions:
How to delete the rate limiting configuration from an interface
1. Log in to the web system, and choose QoS > Interface Rate Limit to access the parameter configuration page for interface-based rate limiting. On the Interface Rate Limit List toolbar, select the check box of the interface from which the rate limiting configuration is to be deleted, and click Delete. Click OK in the displayed dialog box. The rate limiting configuration is deleted from on the interface. 2. Using commands: You can also run the undo command to delete configurations from the interface to which a traffic policy is applied or the interface with rate limiting configured.

How to configure the interface rate on a CE series switch
The following uses a 10GE electrical interface as an example to describe how to configure the interface rate. # Set the rate of electrical interface 10GE1/0/1 working in auto-negotiation mode to 1000 Mbit/s. system-view [~HUAWEI] interface 10ge 1/0/1 [~HUAWEI-10GE1/0/1] speed auto 1000 [*HUAWEI-10GE1/0/1] commit # Set the rate of electrical interface 10GE1/0/1 working in non-auto-negotiation mode to 1000 Mbit/s. system-view [~HUAWEI] interface 10ge 1/0/1 [~HUAWEI-10GE1/0/1] negotiation disable [*HUAWEI-10GE1/0/1] speed 1000 [*HUAWEI-10GE1/0/1] commit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top