Whether the NAT address group configured for the USG6000 affects the access to the public network


After the NAT address group is configured, it does not affect the access to the public network when it is not called.

Other related questions:
Private network user and server are in the same VLAN. After NAT server is configured on the VLANIF interface, why cannot the user access the server using public address
The private network user and server are connected to the same VLANIF interface and the same subcard. After the nat server command is executed in the VLANIF interface view to map the server IP address to a public network address, the response packet sent by the server to the user cannot be sent to the CPU, so the packet address cannot be translated. As a result, the user cannot connect to the server. To solve this problem, run the nat outbound command on the VLANIF interface so that the server's response packet can be sent to the router and the packet address can be translated. The router then forwards the packet to the user. The user can connect to the server.

Whether configuring the nat address group command on the USG6320 affects public network access
After you configure nat address group, public network access is not affected if it is not called.

Whether an address in the NAT address pool can be configured as a public IP address for NAT Server

Configuring intranet users to access a public address on the USG6000
Configuring intranet users to access a public address on the USG6000 as follows: Search for Example for Configuring NAPT for Intranet Users to Access the Internet in USG6000 Product Documentation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top