How to check whether the NAT Server is correctly configured ?

2

Check whether the NAT server for port 80 or port 8080 of the internal server is correctly configured on the firewall. In CLI mode, run the display nat server command to view the NAT server configuration. Check whether the global address, inside address, port address, security zone, and protocol type of the NAT server are correct.

Other related questions:
Method used to check whether fibers are correctly connected on an OSN 6800
TTI bytes can be modified to check whether fibers are correctly connected on OSN 6800 devices.

Method for checking whether fibers are correctly connected on OptiX OSN 6800
TTI bytes can be modified to check whether fibers are correctly connected on OptiX OSN 6800.

Methods used to monitor server hardware
You can use eSight to monitor server hardware. For details, see: http://support.huawei.com/huaweiconnect/enterprise/thread-330965.html

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top