Server-map query on the USG6000 series

6

You can run the display firewall server-map [ vsys vsys-name | all-system ] [ slot slot-id cpu cpu-id ] [ full-cone | nat-server | nat64 | no-pat | slb | pcp | ds-lite | static | dynamic ] [ ip ip-address ] command on the USG6000 series to view server-map entries.

Other related questions:
Meaning of the server mapping on the USG6000
The server mapping is classified into static mapping and server load balancing. The static mapping is a type of one-to-one mapping, that is, a public IP address corresponds to an intranet server. The server load balancing is a type of one-to-many mapping. It can distribute traffic generated by external network users for accessing the intranet servers among specific intranet servers based on a certain algorithm.

Meaning of the server mapping on the USG2000 and USG5000
The server mapping is classified into static mapping and server load balancing. The static mapping is a type of one-to-one mapping, that is, a public IP address corresponds to an intranet server. The server load balancing is a type of one-to-many mapping. It can distribute traffic generated by external network users for accessing the intranet servers among specific intranet servers based on a certain algorithm.

Configuration of the one-to-one mapping of NAT Server on the USG6000
The configuration of the one-to-one mapping of NAT Server on the USG6000 is as follows: On the web UI, choose Policy > NAT Policy > Server Mapping. In the CLI, run the nat server protocol tcp global 1.1.1.2 21 inside 10.3.0.30 21 command.

Content of the threat map for the USG6000 series
The threat map displays global threat distribution with details, including distribution and attack details of the attack source and destination regions.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top