Configuration of traffic mirroring on the web UI for the USG2000&5000 series

40

The USG2000&5000 series does not support traffic mirroring.

Other related questions:
Configuration of traffic mirroring on the web UI for the USG6000 series
The USG6000 series does not support traffic mirroring.

Configuration of traffic mirroring on the CLI for the USG2000&5000 series
The USG2000&5000 series does not support traffic mirroring.

Configuration of IP sweep attack defense for the USG2000&5000 series on the web UI
You can configure IP sweep attack defense for the USG2000&5000 series on the web UI. 1. Choose Firewall > Security Protection > Attack Defense. 2. In the attack defense configuration list, choose Attack Defense Type > Scan. 3. On the Configure Scan Attack Defense page, select Enable corresponding to IP Sweep. 4. Set parameters for IP sweep attack defense. 5. Click Apply.

Configuration of SIP flood attack defense for the USG2000&5000 series on the web UI
You can configure SIP flood attack defense for the USG2000&5000 series on the web UI. Configure SIP flood attack defense based on IP addresses. 1. Choose Firewall > Security Protection > Attack Defense. 2. In the attack defense configuration list, choose Attack Defense Type > Application Layer > SIP Flood. 3. On the Configure SIP Flood Attack Defense page, select Enable corresponding to Defense. 4. Set a port range. 5. Click Add. Enter an IP address in the IP Address text box. 6. Click Apply. Configure SIP flood attack defense based on security zones. 1. Choose Firewall > Security Protection > Attack Defense. 2. In the attack defense configuration list, choose Attack Defense Type > Application Layer > SIP Flood. 3. On the Configure SIP Flood Attack Defense page, select Enable corresponding to Defense. 4. Set a port range. 5. Click the (Optional) Based on Security Zones tab. 6. Click Add. Select a security zone from the Security Zone drop-down list. 7. Click Apply.

Configuration of port scan attack defense for the USG2000&5000 series on the web UI
You can configure port scan attack defense for the USG2000&5000 series on the web UI. 1. Choose Firewall > Security Protection > Attack Defense. 2. In the attack defense configuration list, choose Attack Defense Type > Scan. 3. On the Configure Scan Attack Defense page, select Enable corresponding to Port Scan. 4. Set parameters for port scan attack defense. 5. Click Apply.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top