Route types in the routing table on the USG2000 and USG5000 series

2

Route types in the routing table on the USG2000 and USG5000 series include: protocol and destination address/mask.

Other related questions:
Functions of the routing table on the USG2000 and USG5000 series
When the network is disconnected, you can check whether a route to the specified destination exists in the routing table.

Route types in the routing table on the USG6000 series
Route types in the routing table on the USG6000 series include: protocol and destination address/mask.

The routing type of the USG6000 series device routing table.
The routing type in the USG6000 series routing table includes the protocol and destination address / mask.

Routing protocol types based on the used algorithm on the USG2000 and USG5000 series
Based on the type of algorithm they use, dynamic routing protocols are classified into the following types: Distance-vector routing protocol: includes RIP and BGP. BGP is also called path-vector protocol. Link-state routing protocol: includes OSPF and IS-IS.

Routing protocol types based on the application range on the USG2000 and USG5000 series
Based on the application range, routing protocols are classified into the following types: Interior Gateway Protocol (IGP): runs inside an AS, such as RIP, OSPF, and IS-IS. Exterior Gateway Protocol (EGP): runs between different ASs, such as BGP.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top