Whether the firewall supports static routing backups.

18

The firewall does not support static route backup.

Other related questions:
Whether the firewall supports static route backup
The firewall does not support static route backup.

Do S series switches support static multicast routes
For S series switches, static multicast routes are supported only by S series modular switches, S3700EI, S3700HI, S5720S-SI, S5720SI, S5700EI, S5710EI, S5720EI, S5700HI, S5710HI, S5720HI, S6700EI, S6720EI and S6720S-EI. You can run the igmp static-group command to configure a static multicast group, and the ip rpf-route-static command to configure a static multicast route.

Composition of the static route on a firewall
On the firewall, run the ip route-static command to configure a static route, including: -Destination address and mask -Outbound interface and next-hop address

Why cannot the backup information of a static route or a BGP route be generated after IP FRR is configured
IP FRR does not automatically take effect for iterated routes. Instead, an iterated route inherits the backup outbound interface and backup next hop of the route to the next hop that are generated through IP FRR. If the static route or BGP route is an iterated route and the IP FRR backup information of the next hop route is not generated, the backup information cannot be generated although the static route or BGP route matches the IP FRR policy.

Whether USG firewalls support static MAC address entries
The USG firewalls support static MAC address entries.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top