Functions of the routing table on the USG2000 and USG5000 series

3

When the network is disconnected, you can check whether a route to the specified destination exists in the routing table.

Other related questions:
Route types in the routing table on the USG2000 and USG5000 series
Route types in the routing table on the USG2000 and USG5000 series include: protocol and destination address/mask.

Functions of the black-hole route on the USG2000 and USG5000
The black-hole route provides the following functions: prevent the route loop between the NGFW and the uplink routing device; enable the uplink routing device to learn routes destined for addresses in the address pool.

SLB algorithm functions on the USG2000 and USG5000 series
The load balancing algorithm decides how the firewall allocates service traffic to servers. You shall select a proper load balancing algorithm to obtain the best load balancing result.

Enabling the SLB function on the USG2000 and USG5000 series
Run the slb enable command in the system view to enable the server load balancing function.

Whether the SLB function is enabled by default on the USG2000 or USG5000 series
The SLB function is disabled by default on the USG2000 and USG5000 series.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top