ISP address files embedded in the USG6000

13

Before configuring the routing function for the carrier's address library on the USG6000, you need to write the IP addresses in each ISP network to different CSV files (ISP address files), and import the files to the USG6000.
The following ISP address files have been embedded in the USG6000 upon factory delivery:

china-mobile.csv: China Mobile
china-telecom.csv: China Telecom
china-unicom.csv: China Unicom
china-educationnet.csv: China education net

Other related questions:
Whether the NAT policy can directly reference the address library of an ISP on the USG6000
The source NAT policy of the USG6000 cannot directly reference the address library of the ISP. You need to manually establish the address set and configure the source NAT policy to reference the address set.

Whether the NAT policy can directly reference the address library of an ISP on the USG2000 and USG5000
The source NAT policy of the USG2000 and USG5000 cannot directly reference the address library of the ISP. You need to manually establish the address set and configure the source NAT policy to reference the address set.

How to configure the AR router to obtain DNS address from the ISP provider?
The configuration of the AR router to obtain the DNS address from the ISP provider is as follows. [Huawei] interface dialer 0 [Huawei-Dialer0] PPP IPCP DNS admit-any //configure the router passively receive the address of the DNS server which was specified by other end [Huawei-Dialer0] PPP IPCP DNS request //router active request to end the specified DNS server address

Uploading files through FTP on the USG6000
The configuration roadmap for FTP file upload is as follows: The device serves as the FTP server, and no independent software shall be installed. Configuration on the device is required. Note: When you upload a file to the device from the configuration terminal, and the device has a file with the same name, no information is prompted, and the original file is directly overwritten. To save the original file, run the rename command to change the file name before file upload. 1. Enable FTP and configure the FTP user name, password, and FTP path. system-view [sysname] ftp server enable Info: Start FTP server [sysname] aaa [sysname-aaa] manager-user ftpuser [sysname-aaa-manager-user-ftpuser] password Enter Password: Confirm Password: [sysname-aaa-manager-user-ftpuser] service-type ftp [sysname-aaa-manager-user-ftpuser] level 3 [sysname-aaa-manager-user-ftpuser] ftp-directory hda1:/ Note: The password configured on the device must meet the password strength requirements. It is recommended that the password contain at least three types of such characters as case-sensitive letters, digits, and special characters. Local users for FTP need to run the ftp-directory command to configure the FTP path to save the file on the device. 2. Run the ftp command to log in to the device from the configuration terminal. Run the put command to upload the file to the device. This part uses a Windows PC as an example: Choose Start > Run, enter cmd, and click OK. C:\Documents and Settings\Administrator> ftp 192.168.0.1 User (192.168.0.1:(none)): ftpuser Password: 230 User logged in. ftp>put vrpcfg.cfg /Upload the file to the device. ftp> lcd /You can display the file upload path. Local directory now C:\Documents and Settings\Administrator. ftp> Note: Administrator is the default OS user name. You can set different user names. You can run the lcd command to query the storage path for the backup configuration file. Commands on different FTP clients may differ due to different OSs. For details, refer to related OS documents.

Importing the USG6000 profiles to files in other models
You can upgrade the USG6000 profile as follows: The devices that mutually copy profiles must be in the same model and use software in the same version. The profiles are in .zip or .cfg format and do not support Chinese characters. 1. Choose System > Profile Management. 2. Click Select. The Profile Management page is displayed. 3. Click Upload. The Upload Files page is displayed. 4. Click Browse, and select the profile to be uploaded. 5. Click Upload to upload the profile. After the profile is successfully uploaded, the Profile Management page is displayed. The corresponding files are displayed on the list. 6. Set the system to use the corresponding profile upon the next boot. After the system is restarted, the profile can be upgraded.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top