USG6000 routing mode

44

The USG6000 supports four types of smart routing modes: load balancing based on the link bandwidth, load balancing based on the link weight, active/standby backup based on the link priority, and load balancing based on the link quality. The global smart routing does not support load balancing based on the link quality. The policy-based routing supports all of the four routing modes.

Other related questions:
Route types in the routing table on the USG6000 series
Route types in the routing table on the USG6000 series include: protocol and destination address/mask.

The routing type of the USG6000 series device routing table.
The routing type in the USG6000 series routing table includes the protocol and destination address / mask.

Changing the duplex mode on the USG6000
Choose Network > Interface on the web UI and configure the duplex mode in auto-negotiation of the advanced option.

The role of routing tables in USG6000 series devices.
After a network connection failure occurs, you can check whether there is a route to the destination in the routing table.

Configuring a remote login mode for the USG6000.
Procedure for configuring a remote login for the USG6000: Remote login through Telnet/SSH Procedure: 1. Configure an administrator IP address for the remote access device. A user whose address is on the network range beyond the one specified in the ACL cannot remotely access the device through Telnet or SSH. system-view [sysname] acl 2000 [sysname-acl-basic-2000] rule permit source x.x.x.x 0 [sysname-acl-basic-2000] quit x.x.x.x is the IP address that can be used to remotely access the device. 2. Configure the limit on the number of connections on the VTY administrator interface. Limiting the maximum number of sessions for remote login prevents excessive system resource consumption, facilitates centralized operation and maintenance, and ensures service continuity upon failures. system-view [sysname] user-interface maximum-vty 3 3. Configure login through Telnet/SSH. Note: It is risky to use Telnet for login. You are advised to use SSH for login. Set the account and password of the administrator who logs in to the device through Telnet. Set the administrator level to 3 and the maximum number of connections for the account to 1. Set the IP addresses of users who can access the device remotely using ACL2000. system-view [sysname] telnet server enable [sysname] user-interface vty 0 4 [sysname-ui-vty0-4] authentication-mode aaa [sysname-ui-vty0-4] acl 2000 inbound [sysname-ui-vty0-4] quit [sysname] aaa [sysname-aaa] manager-user admin1 [sysname-aaa-manager-user-admin1] password Enter Password: Confirm Password: [sysname-aaa-manager-user-admin1] service-type telnet [sysname-aaa-manager-user-admin1] level 3 [sysname-aaa-manager-user-admin1] access-limit 1 Set the password and account of the administrator who logs in to the device through SSH. Set the account and password of the administrator who logs in to the device through SSH. Set the administrator level to 3 and the maximum number of connections for the account to 1. system-view [sysname] user-interface vty 0 4 [sysname-ui-vty0-4] authentication-mode aaa [sysname-ui-vty0-4] quit [sysname] aaa [sysname-aaa] manager-user admin1 [sysname-aaa-manager-user-admin1] ssh authentication-type password [sysname-aaa-manager-user-admin1] password Enter Password: Confirm Password: [sysname-aaa-manager-user-admin1] service-type ssh [sysname-aaa-manager-user-admin1] level 3 [sysname-aaa-manager-user-admin1] access-limit 1 Enable the STelnet service on the device. system-view [sysname] stelnet server enable Set the client service mode of SSH user admin1 to STelnet. [sysname-aaa-manager-user-admin1] ssh service-type stelnet

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top