Checking whether the hot standby status is normal

18

Run the display hrp state command to check.
HRP_A display hrp state
The firewall's config state is: ACTIVE

Backup channel usage: 0.01%
Time elapsed after the last switchover: 0 days, 0 hours, 1 minutes
Current state of virtual routers configured as active:
GigabitEthernet1/0/2 vrid 2 : active
GigabitEthernet1/0/1 vrid 1 : active

Other related questions:
How to view the versions and hardware types of S series switches
On S series switches (except the S1700): - Run the display version command to view version information, including the model and running time. Using the S5720HI as an example, the following information is displayed: [HUAWEI] display version Huawei Versatile Routing Platform Software VRP (R) software, Version 5.160 (S5720 V200R007C00) //VRP version and release version Copyright (C) 2000-2014 HUAWEI TECH CO., LTD HUAWEI S5720-56C-HI-AC Routing Switch uptime is 0 week, 1 day, 3 hours, 24 minutes ///Hardware name and running time ES5D2T52C001 0(Master) : uptime is 0 week, 1 day, 3 hours, 23 minutes 4095M bytes DDR Memory 64M bytes FLASH Pcb Version : VER.A Basic BootROM Version : 0207.0015 Compiled at Mar 20 2014 , 22:53:47 BootLoad Version : 0207.0015 Compiled at Mar 14 2014 , 13:33:43 CPLD Version : 256 Software Version : VRP (R) Software, Version 5.160 (V200R007C00) //VRP version and software version SLOT2 information //Information about rear cards. If no rear card is available, this field is not displayed Pcb Version : ES5D21X04S01 VER.A PWR1 information //Information about pluggable power modules. If no pluggable power module is available, this field is not displayed. Pcb Version : PWR VER.A - Run the display device command to view the type and status of components on the switch. The Register field indicates whether a component is registered. [HUAWEI] display device S7712's Device status: Slot Sub Type Online Power Register Status Role 3 - - Present PowerOff Unregistered - NA 4 - ES0D0G48TA00 Present PowerOn Registered Normal NA 13 - - Present PowerOn Unregistered - Slave 14 - ES0D00SRUA00 Present PowerOn Registered Normal Master PWR1 - - Present PowerOn Registered Normal NA CMU1 - LE0DCMUA0000 Present PowerOn Registered Normal Master FAN1 - - Present PowerOn Registered Normal NA

How can I know whether the ViewPoint 86X0 E1 and 4E1 cards are in normal status?
You can check whether the ViewPoint 86X0 E1 and 4E1 cards are in normal status in CLI mode. - Run the display e1-line-status command to check the E1 line status. - Run the display bridge-status command to check the 4E1 line status.

Whether it is normal that the output of the display hrp group command displays that the status of certain groups is disable in hot standby deployment
It is normal. In hot standby deployment, only the active VGMP group on the active device is working, and only the standby VGMP group on the standby device is working.

Do WLAN devices support hot-standby backup
ACs support hot-standby backup. Two hot-standby backup modes are available: HSB+VRRP and HSB+dual-link backup. HSB+VRRP backup implements traffic switching through VRRP, while HSB+dual-link backup implements traffic switching through dual links. Hot-standby backup achieves service backup of two ACs. HSB+VRRP applies only to the active/standby mode, whereas HSB+dual-link backup applies to both the active/standby and load balancing modes.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top