how to configure PCP on USG ?

96

The steps to configure the PCP are as follows: 1 configure NAT address pool
2 configure PCP policy
3 configuration PCP optional function Detailed configuration steps in the "firewall product documentation >" search "configuration PCP" content.

Other related questions:
How to use the command line to view the PCP policy on USG?
Use the following command line to view the PCP policy. display pcp-policy rule { all [ slot slot-id cpu cpu-id ] | name rule-name }

PCP configuration
Configure PCP as follows: 1. Configure the NAT address pool. 2. Configure the PCP policy. 3. Configure the PCP optional functions. For details, see "Configuring PCP" in the firewall product documentation.

Configuring the IS-IS priority on the firewall
The method for modifying the IS-IS priority on the USG2000&5000&6000 is as follows: -Modifying the IS-IS priority: [USG]isis [USG-isis-1]preference 90

Configuring SA on the firewall
Configuring an SA on the USG Creating a dynamic IPSec SA 1. The data between network A and network B is encrypted and securely transmitted through the IPSec tunnel between USG_A and USG_B. USG_A protects network 10.1.1.0/24, and its public address is 202.38.163.1/24. USG_B protects network 10.1.2.0/24, and its public address is 202.38.169.1/24. Network A---USG_A----INTERNET----USG_B---Network B 2. The configuration steps are as follows: [USG_A] acl 3000 //Configure an ACL to match sensitive traffic packets. [USG_A-acl-adv-3000] rule permit ip source 10.1.1.0 0.0.0.255 destination 10.1.2.0 0.0.0.255 [USG_A-acl-adv-3000] quit [USG_A] ip route-static 10.1.2.0 255.255.255.0 202.38.163.2 //Configure a route. [USG_A] ipsec proposal tran1 //Configure an IPSec proposal. [USG_A-ipsec-proposal-tran1] encapsulation-mode tunnel [USG_A-ipsec-proposal-tran1] transform esp [USG_A-ipsec-proposal-tran1] esp authentication-algorithm sha1 [USG_A-ipsec-proposal-tran1] esp encryption-algorithm aes [USG_A-ipsec-proposal-tran1] quit [USG_A] ike proposal 10 //Configure an IKE proposal. [USG_A-ike-proposal-10] authentication-method pre-share [USG_A-ike-proposal-10] authentication-algorithm sha1 [USG_A-ike-proposal-10] integrity-algorithm hmac-sha1-96 [USG_A-ike-proposal-10] quit [USG_A] ike peer b //Configure an IKE peer. [USG_A-ike-peer-b] ike-proposal 10 [USG_A-ike-peer-b] remote-address 202.38.169.1 [USG_A-ike-peer-b] pre-shared-key abcde [USG_A-ike-peer-b] quit [USG_A] ipsec policy map1 10 isakmp //Configure an IPSec policy. [USG_A-ipsec-policy-isakmp-map1-10] security acl 3000 [USG_A-ipsec-policy-isakmp-map1-10] proposal tran1 [USG_A-ipsec-policy-isakmp-map1-10] ike-peer b [USG_A-ipsec-policy-manual-map1-10] quit [USG_A] interface GigabitEthernet 0/0/2 [USG_A-GigabitEthernet0/0/2] ipsec policy map1 //Apply the IPSec policy to the interface. [USG_B] acl 3000 //Configure an ACL to match sensitive traffic packets. [USG_B-acl-adv-3000] rule permit ip source 10.1.2.0 0.0.0.255 destination 10.1.1.0 0.0.0.255 [USG_B-acl-adv-3000] quit [USG_B] ip route-static 10.1.1.0 255.255.255.0 202.38.169.2 //Configure a route. [USG_B] ipsec proposal tran1 //Configure an IPSec proposal. [USG_B-ipsec-proposal-tran1] encapsulation-mode tunnel [USG_B-ipsec-proposal-tran1] transform esp [USG_B-ipsec-proposal-tran1] esp authentication-algorithm sha1 [USG_B-ipsec-proposal-tran1] esp encryption-algorithm aes [USG_B-ipsec-proposal-tran1] quit [USG_B] ike proposal 10 //Configure an IKE proposal. [USG_B-ike-proposal-10] authentication-method pre-share [USG_B-ike-proposal-10] authentication-algorithm sha1 [USG_B-ike-proposal-10] integrity-algorithm hmac-sha1-96 [USG_B-ike-proposal-10] quit [USG_B] ike peer a //Configure an IKE peer. [USG_B-ike-peer-a] ike-proposal 10 [USG_B-ike-peer-a] remote-address 202.38.163.1 [USG_B-ike-peer-a] pre-shared-key abcde [USG_B-ike-peer-a] quit [USG_B] ipsec policy map1 10 isakmp //Configure an IPSec policy. [USG_B-ipsec-policy-isakmp-map1-10] security acl 3000 [USG_B-ipsec-policy-isakmp-map1-10] proposal tran1 [USG_B-ipsec-policy-isakmp-map1-10] ike-peer a [USG_B-ipsec-policy-isakmp-map1-10] quit [USG_B] interface GigabitEthernet 0/0/2 [USG_B-GigabitEthernet0/0/2] ipsec policy map1 //Apply the IPSec policy to the interface.

Configuring IPSec VPN on the firewall
Configuring an SA on the USG Creating a dynamic IPSec SA 1. The data between network A and network B is encrypted and securely transmitted through the IPSec tunnel between USG_A and USG_B. USG_A protects network 10.1.1.0/24, and its public address is 202.38.163.1/24. USG_B protects network 10.1.2.0/24, and its public address is 202.38.169.1/24. Network A---USG_A----INTERNET-----USG_B---Network B 2. The configuration steps are as follows: [USG_A] acl 3000 //Configure an ACL to match sensitive traffic packets. [USG_A-acl-adv-3000] rule permit ip source 10.1.1.0 0.0.0.255 destination 10.1.2.0 0.0.0.255 [USG_A-acl-adv-3000] quit [USG_A] ip route-static 10.1.2.0 255.255.255.0 202.38.163.2 //Configure a route. [USG_A] ipsec proposal tran1 //Configure an IPSec proposal. [USG_A-ipsec-proposal-tran1] encapsulation-mode tunnel [USG_A-ipsec-proposal-tran1] transform esp [USG_A-ipsec-proposal-tran1] esp authentication-algorithm sha1 [USG_A-ipsec-proposal-tran1] esp encryption-algorithm aes [USG_A-ipsec-proposal-tran1] quit [USG_A] ike proposal 10 //Configure an IKE proposal. [USG_A-ike-proposal-10] authentication-method pre-share [USG_A-ike-proposal-10] authentication-algorithm sha1 [USG_A-ike-proposal-10] integrity-algorithm hmac-sha1-96 [USG_A-ike-proposal-10] quit [USG_A] ike peer b //Configure an IKE peer. [USG_A-ike-peer-b] ike-proposal 10 [USG_A-ike-peer-b] remote-address 202.38.169.1 [USG_A-ike-peer-b] pre-shared-key abcde [USG_A-ike-peer-b] quit [USG_A] ipsec policy map1 10 isakmp //Configure an IPSec policy. [USG_A-ipsec-policy-isakmp-map1-10] security acl 3000 [USG_A-ipsec-policy-isakmp-map1-10] proposal tran1 [USG_A-ipsec-policy-isakmp-map1-10] ike-peer b [USG_A-ipsec-policy-manual-map1-10] quit [USG_A] interface GigabitEthernet 0/0/2 [USG_A-GigabitEthernet0/0/2] ipsec policy map1 //Apply the IPSec policy to the interface. [USG_B] acl 3000 //Configure an ACL to match sensitive traffic packets. [USG_B-acl-adv-3000] rule permit ip source 10.1.2.0 0.0.0.255 destination 10.1.1.0 0.0.0.255 [USG_B-acl-adv-3000] quit [USG_B] ip route-static 10.1.1.0 255.255.255.0 202.38.169.2 //Configure a route. [USG_B] ipsec proposal tran1 //Configure an IPSec proposal. [USG_B-ipsec-proposal-tran1] encapsulation-mode tunnel [USG_B-ipsec-proposal-tran1] transform esp [USG_B-ipsec-proposal-tran1] esp authentication-algorithm sha1 [USG_B-ipsec-proposal-tran1] esp encryption-algorithm aes [USG_B-ipsec-proposal-tran1] quit [USG_B] ike proposal 10 //Configure an IKE proposal. [USG_B-ike-proposal-10] authentication-method pre-share [USG_B-ike-proposal-10] authentication-algorithm sha1 [USG_B-ike-proposal-10] integrity-algorithm hmac-sha1-96 [USG_B-ike-proposal-10] quit [USG_B] ike peer a //Configure an IKE peer. [USG_B-ike-peer-a] ike-proposal 10 [USG_B-ike-peer-a] remote-address 202.38.163.1 [USG_B-ike-peer-a] pre-shared-key abcde [USG_B-ike-peer-a] quit [USG_B] ipsec policy map1 10 isakmp //Configure an IPSec policy. [USG_B-ipsec-policy-isakmp-map1-10] security acl 3000 [USG_B-ipsec-policy-isakmp-map1-10] proposal tran1 [USG_B-ipsec-policy-isakmp-map1-10] ike-peer a [USG_B-ipsec-policy-isakmp-map1-10] quit [USG_B] interface GigabitEthernet 0/0/2 [USG_B-GigabitEthernet0/0/2] ipsec policy map1 //Apply the IPSec policy to the interface.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top