Whether the open service component must be installed

27

The open service component must be installed.

Other related questions:
What ports must be opened for NFS?
Port 445 must be available for the CIFS share and port 2049 must be available for the NFS share.

Whether ST2 and STG must be installed in the same subrack
If the clock functions of the ST2 board need to be used, you must insert the board into the subrack equipped with clock boards.

Which Ports Must Be Opened to Access a CIFS Share?
Ports 139 and 445 must be opened to access a CIFS share.

Port used in firewall NAT traversal
Ports that shall be enabled when IPSec NAT traversal is used on the USG: Destination UDP ports 500 and 4500. If no NAT device is deployed, use port 500. If any NAT device is deployed, use port 4500. Port 51 for IP packets using the AH protocol and port 50 for IP packets using the ESP protocols.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top